Masonry & Finishes

Glazed ceramic floor tile 300 × 300 mm is the standard small-format tile for residential wet areas — bathrooms, toilets, and utility rooms — across Malaysia. Each tile covers 0.09 m²; a box of 16 tiles covers 1.44 m². Manufactured by dust-pressing a clay body, then kiln-firing with a glazed surface. Classified to MS ISO 13006:2020 (Malaysian adoption of ISO 13006:2018) as Group BIIb or BIII based on water absorption; sale in Malaysia requires a SIRIM MS certification mark under CIDB Schedule 4, Act 520. Abrasion resistance class 3–4 suits general foot-traffic floors. Also sold as jubin lantai seramik or 1′ × 1′ tile in the local trade. HS 6907212300 · import duty 60% · SST 10%.

Porcelain homogeneous floor tile (600 × 600 mm) is a full-body vitrified floor finish used for residential living areas, commercial lobbies, and office floors in Malaysian construction. Classified to MS ISO 13006:2020 Group BIa with water absorption ≤ 0.5%, it offers through-body colour and high durability suitable for heavy-duty use. Abrasion resistance class 4–5 makes it appropriate for high-traffic areas. Sold by the m², with approximately 3.6 m²/box (10 pieces per box). HS 6907212100 · import duty 50% · SST 10%. Mandatory under CIDB Schedule 4 (Act 520); SIRIM QAS certification required. Commonly known as jubin homogen or homogeneous tile; pairs with C2 tile adhesive and CG2 grout for best performance.

Ceramic wall tile (200 × 300 mm, glazed) is a glazed interior wall finish used for bathroom, toilet, and kitchen backsplash surfaces in Malaysian construction. Classified to MS ISO 13006:2020 Group BIII (water absorption > 10%), it is rated for internal wet-area walls only and must not be used on floor surfaces due to low abrasion resistance (class 0). Supplied at approximately 1.2 m²/box (20 pieces per box). HS 6907409200 · import duty 10% · SST 10%. CIDB Schedule 4 (Act 520) regulated; SIRIM QAS certification required. Known locally as jubin dinding; sized 200 × 300 mm (8" × 12"). Install with C1 tile adhesive on cement plaster or concrete substrates.

Mosaic tile sheet (300 × 300 mm) is a mesh-backed or paper-backed assembly of small ceramic or porcelain chips used for swimming pools, feature walls, bathroom floors, and decorative backsplashes in Malaysian construction. Individual chip sizes range from 25 × 25 mm to 50 × 50 mm; porcelain mosaics conform to MS ISO 13006:2020 Group BIa (water absorption ≤ 0.5%), making them suitable for continuously wet areas including pools. Approximately 10–11 sheets cover 1 m². HS 6907301900 · import duty 10% · SST 10%. Install with C2 or C2S1 flexible tile adhesive; finish with CG2WA grout for pool applications.

Vinyl (PVC) floor tiles are resilient polyvinyl chloride floor coverings used in Malaysian kitchens, bathrooms, offices, and retail spaces as a waterproof, low-maintenance alternative to ceramic tile. Available as 300 × 300 mm self-adhesive squares or 150 × 920 mm click-lock planks; box coverage approximately 1.5–3.0 m². Residential wear layers run 0.3–0.5 mm; commercial grades 0.7 mm and above. SPC (stone-polymer composite) variants have a rigid mineral core for greater dimensional stability. Properties per MS EN ISO 10582 (Heterogeneous PVC floor coverings) where applicable. Classified under HS 3918101100 · import duty 20% · SST 10%. Also traded as vinyl tile, plastic floor tile, jubin lantai vinyl, and jubin PVC.

Marble and granite natural stone tiles and slabs are worked natural stone products used for premium floor finishes, wall cladding, stair treads, countertops, and feature installations in Malaysian construction. Tiles come in 600 × 600 mm or 300 × 600 mm formats (approximately 1–4 m²/box); slabs in individual pieces of 2400 × 1200 mm. Marble offers distinctive veining; granite provides hardness and scratch resistance. Surface finishes include polished, honed, and brushed. Classified under HS 6802210000 · import duty 30% · SST 10%/0%. Imported predominantly from China, India, Italy, and Brazil. Industry reference: EN 12057 (natural stone modular tiles). Also traded as jubin marmar, jubin granit, and natural stone tile.

Porcelain homogeneous floor tile 600 × 1200 mm is a large-format full-body porcelain tile used for premium floors and walls in Malaysian condominium living areas, hotel lobbies, and high-end commercial interiors. To MS ISO 13006:2020 Group BIa (water absorption ≤ 0.5%); rectified edges allow near-seamless 1–2 mm grout joints. Thickness 9–11 mm requires a flat substrate and strong flexible adhesive. Each box holds 2 pieces (1.44 m²). Classified under HS 6907212100 · import duty 50% · SST 10%. Fewer grout lines and a monolithic visual effect make this format the dominant premium tile choice in Malaysia. Also traded as large format tile, 600x1200 tile, jubin besar, and jubin format besar.

Swimming pool waterline tiles are small-format glazed ceramic or glass tiles used at the water-level band of pools, spa surrounds, and water features in Malaysian construction. They must resist continuous immersion, pool chemicals (chlorine and pH adjusters), and UV exposure. Water absorption ≤ 3% (Group BIIb or better) to MS ISO 13006:2020; frost resistance R9 class for outdoor pools; chemical resistance to standard pool chlorine required. Box coverage approximately 1.0–1.44 m² in 100 × 200 mm format. Classified under HS 6907221300 · import duty 60% · SST 10%. The 100 × 200 mm format dominates Malaysian pool waterline applications. Also traded as pool tile, jubin kolam, and jubin garis air.

Cement plaster / render (bagged, 25 kg) is a pre-mixed dry mortar used to coat masonry walls and concrete surfaces before painting, tiling, or skim coating in Malaysian construction. OPC-based with graded fine aggregate; applied at 10–15 mm thickness to provide a flat, smooth substrate. Compressive strength class M5–M10, analogous to BS EN 998-1 Type GP (general purpose) rendering mortar. Sold per 25 kg bag (some brands also 40 kg). No HS data present; no mandatory Malaysian MS for general cement render identified — verify if product carries SIRIM quality mark. Used on brick, block, and concrete substrates ahead of plaster or tile finishes.

Gypsum plaster (bagged, 25 kg) is a calcium sulphate-based interior plaster used for wall and ceiling finishes in Malaysian residential and commercial construction. Classified to EN 13279-1 (building plaster); typical grades B2 (with aggregate) or B3 (one-coat renovation). Sets faster than cement plaster, requires no water curing, and produces a smooth white surface ready for painting or wallpaper. Coverage approximately 3–4 m²/bag at 6 mm thickness. HS 2520209000 · import duty 20% · SST 5%. Suitable for interior dry areas only; not recommended for external or permanently damp applications. Brands active in Malaysia include Knauf and USG Boral.

Premix cement render (base coat plaster) is a factory-blended dry mortar used as a wall levelling substrate before skim coat or painting in Malaysian construction. Combining Portland cement, graded fine sand, and polymer additives, it is mixed on site with water and applied to brick, AAC block, or concrete block walls at 6–15 mm thickness in one or two coats. Available in 25 kg and 40 kg bags, coverage runs approximately 10–20 kg/m² depending on coat thickness. Suitable for both interior and exterior walls in Malaysia's high-humidity tropical climate, polymer modification improves bond strength and reduces shrinkage cracking compared to plain cement-sand mixes. Also traded as base plaster, render undercoat, quick render, plaster asas, and render simen.

Hydrated lime (kapur plaster) is a fine calcium hydroxide powder used as a plasticiser additive in cement-sand mortar and plaster mixes in Malaysian construction. Adding 10–15% hydrated lime by volume to cement-sand improves workability, water retention, and bond strength while reducing shrinkage cracking. Sold in 8 kg retail bags for site use; purity ≥ 70% Ca(OH)₂ for builders' grade. A familiar sight on Malaysian construction sites where plasterers blend it into base-coat mixes for brick and block walls. Also known as builder's lime, calcium hydroxide, kapur hidup, and lime putty. No HS tariff data available for this entry.

Liquid render and self-levelling underlayment compound is a pumpable or poured polymer-modified cementitious product used for interior floor levelling and exterior wall rendering in Malaysian construction. The floor-grade variant is poured at 3–20 mm depth over prepared subfloors, self-correcting undulations to produce a flat tile-ready surface; coverage is approximately 1.6 kg/m² per mm thickness. The wall-applied variant is spray or roller applied to create a smooth render finish without trowelling. Sold in 25 kg bags; mixed on site with water. Common trade names include SLU, self-levelling compound, render cecair, and kompaun aras sendiri.

Decorative marmorino (Venetian plaster) is a specialist wall finish incorporating marble dust and lime, applied in thin successive trowelled layers to create polished stone-like or richly textured surfaces on interior walls and ceilings. Used in high-end residential and hospitality fit-outs in Malaysia, it produces a bespoke visual depth unavailable from standard paint or skim coat. Available in 5 kg or 25 kg pails and bags; coverage ranges 1–3 m²/kg depending on texture depth. Applied wet over a cured base coat and burnished to the desired sheen. Product specification is per manufacturer — no specific Malaysian Standard applies. Trade names include Venetian plaster, faux marble plaster, plaster hiasan, and kemasan marmorino.

Plaster and gypsum ceiling cornice strips are pre-moulded decorative transitional mouldings used in Malaysian construction to conceal the wall-ceiling junction and add architectural detailing to interior spaces. Manufactured from calcined gypsum or Portland cement with fibrous reinforcement; available in 2.4 m and 3.0 m lengths, sold by piece or box of 4–6 pieces. Profiles range from simple coving to elaborate Victorian and classical designs. Fixed to walls and ceilings with cornice adhesive compound or nails. Classified under HS 6809199000 · import duty 25% · SST 10%. Also traded as gypsum cornice, coving, cornice moulding, kornis siling, and 石膏线.

Spray plaster (machine-applied texture finish) is a pre-blended polymer-modified fine-aggregate cementitious finish coat designed for pump application through GRACO or Ritmo-type spray machines on exterior and interior walls in Malaysia. A single sprayed pass at 2–5 mm produces a speckled or fine aggregate texture; coverage is approximately 8–15 m²/bag from a 25 kg bag. Significantly faster than hand-trowelled plaster, it is the preferred exterior finish coat for high-rise cladding and large-area walls. Available in grey and white base. No specific Malaysian Standard — specification per manufacturer. Also traded as machine plaster, spray render, spray finish coat, plaster semburan, and kemasan sembur.

Cornice compound and plasterboard joint filler is a setting-type gypsum or polymer-modified powder used in Malaysian drywall and cornice installation to tape and finish board joints, fill corner bead flanges, and fix gypsum cornice strips. Unlike air-dry compounds, the chemical setting reaction produces a hard, low-shrinkage fill with typical setting time of 30–60 minutes. Sold in 20 kg bags; industry reference EN 13963 (Jointing materials for gypsum boards). Classified under HS 2520209000 · import duty 20% · SST 5%. Used by gypsum board contractors throughout Malaysia for skimboard systems and suspended ceiling cornices. Also traded as joint compound, drywall compound, kompaun kornis, and 嵌缝石膏.

Skim coat / wall putty (bagged, 20 kg) is a polymer-modified thin-coat surfacing compound applied at 1–3 mm thickness over plastered or concrete walls before painting in Malaysian construction. It fills hairline cracks, surface imperfections, and pin holes to produce a smooth base for topcoat application. Available as dry cement powder (mixed on site) or ready-mix acrylic paste (20 L pail). HS 3214900000 · import duty 5% · SST 5%. No mandatory Malaysian MS identified for this product category. Widely used in Malaysian residential construction preceding interior emulsion or exterior weathershield paint. Brands include Weber, Mapei, and Lanko.

Polymer-modified skim coat top coat is a fine cementitious finishing compound used as the final 1–2 mm layer over cured base plaster on interior walls and ceilings in Malaysian construction. The polymer content improves adhesion, reduces shrinkage cracking, and extends working time compared to plain cement skim. Sold in 25 kg bags with coverage of approximately 12–18 m²/bag. Water-resistant variants are also suitable for exterior walls. Classified under HS 3214900000 · import duty 5% · SST 5%. Widely used in Malaysian residential and commercial projects for smooth, paintable wall surfaces; common trade names include skim coat finish, finishing skim, lapisan atas skim, and skim cat kemasan.

Interior emulsion paint (water-based, 18 L) is a water-based acrylic or vinyl finish coat used for interior walls and ceilings in Malaysian residential and commercial construction. Formulated to MS 134:2007 (Latex Emulsion Paint for Exterior and Interior Use); washable with coverage approximately 10–12 m²/litre over two coats. Sold in 18 L pails; also available in 5 L and 1 L tins. HS 3209109000 · import duty 25% · SST 10%. Applied over skim coat or primed plaster surfaces. SIRIM-certified products should conform to MS 134:2007. Major Malaysian brands include Nippon Paint and Dulux.

Exterior weathershield / acrylic masonry paint (18 L) is a high-build exterior finish coat used on external concrete, rendered masonry, and fibre cement walls in Malaysian construction. Formulated to MS 134:2007 (exterior classification) for tropical conditions — high UV, humidity, and rainfall. Anti-algae and anti-fungal properties are standard; elastomeric variants offer elongation ≥ 100% for crack-bridging. Coverage approximately 8–10 m²/litre over two coats. Sold in 18 L pails; also 5 L tins. HS 3209109000 · import duty 25% · SST 10%. Major Malaysian brands include Nippon WeatherBond, Dulux Weathershield, and Jotun Jotashield.

Gloss enamel paint (alkyd/oil-modified, 5 L) is a solvent-based oil-modified alkyd topcoat used for wood and metal surfaces in Malaysian construction — doors, windows, gates, grilles, and structural steelwork. Governed by MS 125:1995 (Specification for Gloss Enamel Paint — SIRIM); produces a hard, high-gloss film with strong adhesion. Hard dry time approximately 16 hours. Sold in 5 L tins; also available in 1 L and 15 L. No HS data present for this product. Apply by brush or roller over primed wood or metal surfaces; compatible with alkyd undercoat systems.

Wall sealer / primer (water-based, 5 L) is an alkali-resisting acrylic primer applied to new plaster, concrete, or skim-coated surfaces before topcoat paint in Malaysian construction. It reduces surface porosity, consolidates friable substrates, and blocks alkali bleed to improve adhesion of subsequent interior or exterior emulsion coats. Sold in 5 L tins; also 1 L tin and 18 L pail. HS 3209109000 · import duty 25% · SST 10%. No dedicated Malaysian MS for primers; refer to manufacturer technical data sheet. Standard practice in Malaysian residential and commercial construction before any interior or exterior paint system.

Textured exterior coating (spray/roll-on, 20 L) is an acrylic-based masonry finish used to create decorative rough or sand-texture surfaces on external walls in Malaysian construction. Applied by spray gun, roller, or special brush; hides surface defects, small cracks, and substrate irregularities. Coverage approximately 1.5–2.5 m²/litre depending on texture level; crack-bridging capability. Sold in 20 L pails; also 7 L. HS 3209109000 · import duty 25% · SST 10%. No dedicated Malaysian MS for textured coatings; refer to manufacturer TDS. Commonly used on Malaysian terrace houses and shophouses as a durable facade finish; known locally as cat bertekstur or cat pasir.

Cement-based tile adhesive C1 (normal, 20 kg) is a standard-class cementitious tile fixing mortar used for installing standard ceramic wall and floor tiles on concrete, screed, or cement plaster substrates in Malaysian construction. Classified C1 per MS ISO 13007-1 with tensile adhesion strength ≥ 0.5 N/mm² after normal curing and open time ≥ 20 minutes. Mixed with water on site; applied by notched trowel. Sold in 20 kg bags (also 25 kg). HS 3214100000 · import duty 5% · SST 5%. Governed by MS ISO 13007-1 and MS 1294 code of practice (SIRIM). Suitable for standard-format tiles; upgrade to C2 class for large-format porcelain ≥ 600 × 600 mm.

Cement-based tile adhesive C2 (improved, 20 kg) is a polymer-modified cementitious adhesive required for large-format porcelain and homogeneous tiles (≥ 600 × 600 mm), external wall tiles, and wet areas in Malaysian construction. Classified C2 per MS ISO 13007-1 with tensile adhesion ≥ 1.0 N/mm² after normal curing. Optional suffixes: T (extended open time ≥ 30 min), S1 (deformable 2.5–5 mm), S2 (highly deformable ≥ 5 mm). Sold in 20 kg bags (also 25 kg). HS 3214100000 · import duty 5% · SST 5%. SIRIM MS ISO 13007-1 compliant. Pairs with CG2WA grout for external and pool applications.

Construction adhesive (general purpose / contact adhesive) is a polychloroprene (neoprene) or SBR-based contact bonding agent used for laminate sheets, timber trims, rubber mouldings, acoustic panels, and decorative veneers in Malaysian construction. Applied to both surfaces, allowed to tack dry, then contact-bonded for immediate high-tack hold. Available in 1 L and 3 L tins and 300 mL cartridges. No HS data present for this product. No specific Malaysian MS standard identified; verify manufacturer data sheet. Common in partition lining, false ceiling trims, and carpentry finishes. Solvent-based and water-based variants are both available.

Flexible waterproof tile adhesive (C2S1 / C2S2, 20 kg) is a highly polymer-modified cementitious adhesive specified for swimming pools, external building facades, and thermal expansion zones in Malaysian construction. Classified C2S1 (transverse deformation 2.5–5 mm) or C2S2 (≥ 5 mm) per MS ISO 13007-1 with tensile adhesion ≥ 1.0 N/mm². High polymer content accommodates substrate movement and thermal cycling. Sold in 20 kg bags. HS 3214100000 · import duty 5% · SST 5%. Governed by MS ISO 13007-1 (SIRIM). Required for under-floor heating substrates, large facades, and any tile installation subject to regular movement or water immersion.

AAC thin-bed block adhesive (bagged, 40 kg) is a polymer-modified cementitious mortar specifically formulated for laying AAC/ALC lightweight blocks with joint widths of 1–3 mm in Malaysian construction. The thin joint reduces cold-bridging through the mortar bed, improving overall wall thermal resistance compared to traditional 10–15 mm mortar beds. Compressive strength ≥ 4 N/mm² after cure. Sold in 40 kg bags. HS 3214100000 · import duty 5% · SST 5%. Pairs with AAC blocks (D500–D700) to achieve the thermal and acoustic benefits of lightweight block construction. Required by AAC block manufacturers to maintain their system performance warranty.

Cementitious plastering bonding agent is a liquid SBR (styrene-butadiene rubber) or acrylic polymer primer applied to smooth, low-porosity, or contaminated surfaces before plastering, rendering, or skim coating in Malaysian construction. Brushed or rolled onto glossy concrete soffits, existing tiles, or old painted walls, it dries to a tacky film that creates a mechanical and chemical key preventing delamination of the fresh plaster or skim layer. Available in 5 L and 20 L pails; coverage 4–8 m²/L. Essential at junctions where direct adhesion is insufficient. Also traded as bonding bridge, concrete bonding agent, SBR bonding agent, ejen ikatan, and praimer pelekatan.

Neutral-cure silicone sealant (310 mL cartridge) is a one-part RTV (room-temperature vulcanising) sealing compound used for sanitary joints, glazing, and wet-area finishing seals in Malaysian construction. Applied to perimeter seals around sanitary ware, shower cubicle edges, glazing frames, and tile-to-wall joints. Remains permanently flexible; temperature resistance typically −40°C to +180°C; elongation at break ≥ 200%. Equivalent to ASTM C920. Sold per 310 mL cartridge; box of 12. HS 3214100000 · import duty 5% · SST 5%. No specific Malaysian MS for finishing silicone identified. White and clear variants common in Malaysia; brands include Sika SikaSil and Dow Corning.

Paintable acrylic sealant (310 mL cartridge) is a one-part water-based decorator caulk used for finishing internal dry-area joints in Malaysian construction — gaps between skirting boards and walls, around door frames, and at cornice or coving junctions. Overcoatable with emulsion paint once dry; elongation at break typically 80–120%. Sold per 310 mL cartridge; box of 12. HS 3214100000 · import duty 5% · SST 5%. Not recommended for wet or external joints; use neutral-cure silicone sealant for those applications. No specific Malaysian MS identified. Brands include Sika, Bostik, and Selley.

Penetrating tile and natural stone sealer is a silane or siloxane-based impregnating treatment used to protect polished porcelain, marble, granite, and unglazed ceramic surfaces in Malaysian construction from stain absorption. Applied by brush or roller, the formula penetrates and lines pores without forming a visible surface film, reducing stain absorption by ≥ 80% typical, without altering appearance or slip resistance. Available in 1 L and 4–5 L bottles; coverage 5–15 m²/L depending on surface porosity. Recommended for newly installed natural stone floors, wet areas, and outdoor stone paving exposed to Malaysia's year-round rainfall. Also traded as stone sealer, impregnating sealer, porcelain sealer, pengelap batu, and pengelap jubin.

Cement-based tile grout CG1 (normal, 5 kg) is a standard-performance coloured cementitious grout used to fill joints between ceramic and porcelain tiles in Malaysian residential and commercial projects. Classified CG1 per MS ISO 13007-3; suitable for joints 2–12 mm wide in interior and sheltered exterior applications. Mixed with water on site; available in multiple colours. Sold in 5 kg bags; also 2 kg and 20 kg. HS 3214100000 · import duty 5% · SST 5%. Governed by MS ISO 13007-3 and MS 1294 code of practice (SIRIM). Not recommended for permanently wet areas or wide movement joints; use CG2WA or RG epoxy grout for those applications.

Cement-based tile grout CG2 (enhanced, 5 kg) is a polymer-modified coloured grout specified for demanding applications in Malaysia — swimming pools, external paving, wet rooms, and high-traffic commercial floors. Classified CG2 per MS ISO 13007-3; suffix W (reduced water absorption) and A (high abrasion resistance) are standard in CG2WA and CG2FA grades. Sold in 5 kg bags; also 2 kg. HS 3214100000 · import duty 5% · SST 5%. Governed by MS ISO 13007-3 and MS 1294 (SIRIM). Required where CG1 is insufficient due to continuous moisture, chemical exposure, or abrasive traffic.

Epoxy tile grout RG class (2 kg kit) is a two-component reaction resin grout used where stain resistance and chemical resistance are critical in Malaysian construction — commercial kitchens, food-processing facilities, laboratories, and swimming pools. Classified RG per MS ISO 13007-3; compressive strength typically ≥ 35 N/mm². Supplied as resin + hardener + filler kit; also available in 5 kg kits. No HS data present for this product. Requires skill to apply within working time before the epoxy sets. Outperforms cement-based grouts in chemical-splash environments and high-hygiene settings.

Tile joint filler / decorative grout (coloured cement, 2 kg) is a small-pack pre-mixed cement-based coloured grout used to fill narrow tile joints (1–6 mm) in mosaic, pool, and small-format tile applications in Malaysia. Meets minimum requirements per MS ISO 13007-3; pigmented with mineral oxides for colour stability. Available in 2 kg retail format (also 5 kg); colours include white, grey, and beige. HS 3214100000 · import duty 5% · SST 5%. The 2 kg pack is the retail and maintenance format used by contractors for repairs and homeowners for DIY tiling work. Governed by MS 1294 code of practice (SIRIM).

Common clay brick (batu merah) is a kiln-fired clay masonry unit used for loadbearing and non-loadbearing walls in residential and light-commercial construction throughout Malaysia. Conforming to MS 76:1972 (Malaysian Standard for clay bricks); nominal size 215 × 102 × 65 mm. Typical compressive strength ≥ 7 N/mm²; water absorption ≤ 20% for general use. Sold per piece or per pallet (approximately 600–720 pieces). HS 6904100000 · import duty 30% · SST 0%. Domestically produced across Malaysia; batu merah is the traditional term used in local construction trade.

Cement sand brick (batu simen) is a hydraulically pressed masonry unit made from Portland cement, sand, and water, used for non-loadbearing partition walls and general walling in Malaysian residential and commercial construction. Typical compressive strength ≥ 7 N/mm² (Grade B general use); nominal size 215 × 100 × 65 mm. Sold per piece or per pallet (approximately 600–760 pieces). No HS data present for this product. Manufactured to general requirements of MS 7.6 (precast concrete masonry units) or site practice. Offers consistent size and colour compared to clay bricks; cost-effective choice for internal partitions.

Ceramic facing brick (decorative/exposed) is a kiln-fired clay unit with a smooth or textured decorative face used for exposed wall finishes in feature walls, facades, and compound boundaries in Malaysian construction. Available in solid, 3-hole, and 10-hole perforated configurations; nominal size 215 × 100 × 65 mm, approximately 500–600 pieces per pallet. Perforations reduce weight and improve mortar bond for plastering. HS 6904100000 · import duty 30% · SST 0%. Known locally as batu muka or face brick. Low water absorption for weathering resistance; suitable for both internal and external exposed masonry in Malaysian climate.

AAC autoclaved aerated concrete lightweight block is a factory-produced masonry unit made by aerating a cement-lime-silica slurry and steam-curing under pressure, used for partition and infill walls in modern Malaysian high-rise and landed residential construction. Density class D500–D700 (500–700 kg/m³); compressive strength class CS1–CS4; thermal conductivity ≈ 0.12–0.22 W/(m·K). Common sizes: 600 × 200 × 100/125/150/200 mm; approximately 120–180 pieces per pallet. No HS data present. General properties follow BS EN 771-4; Malaysian practice references SIRIM certification. Installed with thin-bed adhesive mortar (1–3 mm joint) for improved thermal performance.

Ventilation brick / louvre block (batu angin) is a ceramic or cement-sand masonry unit with an open louvre or lattice pattern used in garden walls, boundary screens, and subfloor ventilation openings in Malaysian construction to allow air flow and light diffusion. Available in fired clay and cement-sand variants; common depths are 4" and 5"; approximately 200–300 pieces per pallet. HS 6904100000 · import duty 30% · SST 0%. Known locally as batu angin (ventilation brick) or blok pengudaraan. Provides privacy screening while maintaining passive ventilation — particularly valued in Malaysian tropical climate for natural cross-ventilation in low-rise buildings.

Hollow glass blocks are fused-glass masonry units used in Malaysian construction to create translucent partition walls, shower screens, stairwell enclosures, and decorative exterior boundary features that admit natural light while maintaining privacy. The sealed air cavity provides acoustic and thermal insulation. Light transmission is typically ≥ 70%. Standard sizes are 190 × 190 × 80 mm and 145 × 145 × 80 mm; sold by piece. Installed with white cement mortar and silicone-finished joints. Classified under HS 7016900000 · import duty 20% · SST 10%. Also traded as glass brick, blok kaca, and bata kaca.

Gypsum plasterboard sheet (4' × 8', 1200 × 2400 mm) is a paper-faced gypsum-core dry-lining board used for interior partitions and ceiling linings in Malaysian commercial and residential construction. Properties conform to MS EN 520:2009; common types include Type A (standard), Type H (moisture-resistant, green core), and Type F (fire-resistant, pink core). Thickness range 8–12.5 mm; tapered or square edge. Sold per sheet; approximately 60–100 sheets per pallet. HS 6809110000 · import duty 30% · SST 10%. Installed on steel or timber framing systems; jointed with tape and compound. Widely specified in Malaysian office fit-outs, hotel rooms, and residential partitions.

Fibre cement board sheet (4' × 8', 1200 × 2400 mm) is a non-combustible, moisture-resistant flat sheet of Portland cement reinforced with cellulose or synthetic fibres, used for exterior cladding, wet-area backing boards, eaves linings, and ceiling tiles in Malaysian construction. Properties follow BS EN 12467 (fibre cement flat sheets) as industry reference; density 1000–1500 kg/m³ depending on thickness. Available in thicknesses from 3.2 mm (ceiling tile grade) to 25 mm (structural grade). No HS data present for this product. Resists moisture, fungal growth, and fire better than gypsum board; preferred for bathrooms, external soffits, and facades in Malaysian tropical conditions.

Concrete interlocking paver blocks are precast units used for car parks, driveways, footpaths, and landscaped areas in Malaysian construction. The profiled edges lock adjacent units together without mortar, distributing traffic loads across the pavement without individual unit failure. Compressive strength is ≥ 50 MPa for pedestrian areas and ≥ 60 MPa for light vehicular traffic; thickness is 60 mm (pedestrian) or 80 mm (vehicular). Available in rectangular, hexagonal, and shaped profiles; sold by piece or pallet. Practice references BS EN 1338 (Concrete paving blocks). Common trade names include paving block, conblock, blok paver, and blok turap berkunci.

Concrete grass paver blocks are open-grid precast units used for eco-friendly car parks, fire-access lanes, and overflow parking in Malaysian residential and commercial developments. The 40–50% open cell area allows grass or gravel fill to grow through while the 80 mm concrete frame bears vehicular loads. The permeable structure also promotes rainwater infiltration, reducing surface runoff in line with Malaysia's urban stormwater management goals. Available in Rosenberg, SAGA, Desert Lily, and Hexagon profiles; sold by piece. Suitable for private car-parking load class. Also traded as grass block, turf paver, eco-pave, blok rumput, and paver rumput.

Stone veneer panels are thin decorative cladding units used on interior and exterior wall surfaces in Malaysian construction to replicate the appearance of natural ledge stone, brick, or random ashlar. Units measure 10–25 mm thick, typically 120 × 600 mm or smaller mosaic formats; box coverage approximately 0.5–1.0 m². Available in real-stone variants (split-face slate, limestone, quartzite) and cast-cement culture stone. Adhered with tile adhesive or dedicated stone adhesive mortar; applied to feature walls, facades, compound walls, and retail interiors. Fire performance subject to manufacturer test data; no specific Malaysian Standard confirmed. Also traded as ledge stone, wall stone cladding, venir batu, and kelongsong batu.

Trowel-applied stone texture coating is a pre-mixed polymer-cement compound with aggregate particles, used to create natural stone, cobblestone, or pebble-dash surface effects on walls and floors in Malaysian construction. Applied 3–8 mm thick by trowel; a 14 kg drum covers 27–33 sq ft for floor grade and a 25 kg drum covers 22–61 sq ft for wall grade, depending on aggregate size. Self-coloured by aggregate — no painting required after curing. Suitable for exterior feature walls, garden walls, boundary walls, and decorative outdoor flooring. Product specification is per manufacturer; no specific Malaysian Standard confirmed. Trade names include stucco texture coating, stone texture render, salutan batu trowel, and tekstur batu.

PVC corner beads are extruded L-profile strips with perforated flanges used in Malaysian construction to reinforce external wall corners in skim coat and plaster finishes. The flanges embed in wet skim coat or plaster before the finish coat is applied, protecting the corner from chipping and impact while providing a perfectly straight guide edge for the plasterer's float. Each piece is 2.5 m long; a box holds approximately 100 pieces. Profile size is typically 19 × 19 mm. Made from UV-stabilised PVC for long-term colour and brittleness resistance. Also traded as angle bead, PVC angle bead, sudut PVC, bebola sudut skim, and 护角条.

Galvanised brickwork reinforcement mesh tape is a roll of narrow expanded-metal galvanised steel used to control cracking in block and brick walls in Malaysian construction. Embedded in horizontal mortar bed joints during laying, the tape distributes movement stresses and prevents visible surface cracks, particularly at junctions between dissimilar materials such as AAC block abutting RC columns. Each roll is 75 mm (3") wide × 36 m (120 ft) long. Galvanising minimum G60 zinc coating resists mortar alkalinity for long-term durability in humid Malaysian conditions. Sold by roll. Also traded as masonry mesh tape, ex-mesh tape, joint reinforcement tape, tetulang dinding bata, and pita jaring keluli berzink.

Tile, brick, and concrete acid cleaner is a dilute acid-based or specialty enzymatic solution used after installation to remove cement haze, grout film, efflorescence deposits, and mortar stains from freshly tiled or brick-laid surfaces in Malaysian construction. Formulations are typically hydrochloric or phosphoric acid blends, diluted before use. Available in 1 L, 5 L, and 20 L containers; application requires PPE and thorough rinsing after use. Restores tile or brick face colour and sheen. Dwell times vary by substrate — follow dilution ratios on the label. Also traded as efflorescence remover, grout haze remover, acid wash, pencuci jubin, and pencuci asid.

Plasterboard joint compound is a gypsum-based filler used by drywall contractors in Malaysian construction to embed tape and fill joints, corner beads, and screw holes in plasterboard (gypsum board) systems. Setting-type compounds (working times of 45, 90, or 210 minutes) are used for bedding coats; all-purpose or topping compounds for the finish coat before painting. Sold in 28 kg bags (setting type) or ready-mixed in 20–25 L buckets; compatible with paper tape and mesh tape. Classified under HS 6809199000 · import duty 25% · SST 10%. Common brands include USG Easy Joint. Also traded as easy joint, jointing compound, taping compound, sebatian sambungan papan gipsum, and 石膏嵌缝料.

Self-levelling floor underlayment compound is a cement-based or gypsum-anhydrite-based poured material used to create a flat, smooth base for flooring in Malaysian construction. Mixed with water and poured onto a prepared subfloor, it self-corrects undulations under gravity to achieve ±2 mm flatness over a 3–6 mm typical pour depth. Coverage is approximately 4–5 m² per 25 kg bag at 5 mm thickness. Compressive strength typically ≥ 20 N/mm². Fast-cure versions allow early foot traffic. Used in office fit-outs, retail renovations, and housing projects as a substrate for carpet, vinyl, ceramic tile, and timber flooring. Also traded as SLU, flow screed, floor levelling compound, sebatian aras sendiri, and sebatian rataan lantai.

Decorative garden pebbles are washed, sized natural river or quartz stones used for landscaping in Malaysian residential and commercial developments. Applications include garden path paving, ground cover beneath plants, roof garden drainage layers, poolside surrounds, and exposed-aggregate decorative finishes. Available in 20 kg bags in white, black, yellow, and mixed colour sets. Grades: BP 2×3 cm (20–30 mm round pebbles), FSG (fine sieve gravel 5–10 mm), and RFS (round flat stones). Classified under HS 2517490000 · import duty 0% · SST 0% — zero tariff burden on imports. Also traded as landscaping pebble, river pebble, kerikil hiasan, batu taman, and batu laman.

Decorative wallpaper is an interior wall finishing material used in residential and light commercial renovation projects in Malaysia as a faster and more design-flexible alternative to paint or tile. Formats include paper-backed vinyl, non-woven, and self-adhesive 3D foam relief panels mimicking stone or brick. Standard rolls are 0.53 m × 10 m or 0.6 m × 5 m; 3D foam tiles sold per piece. Vinyl types are washable and moisture-tolerant; non-woven types are tear-resistant and paste-the-wall compatible. 3D foam panels are self-adhesive and popular for feature walls in homes, offices, and retail interiors. Also traded as wall covering, vinyl wallpaper, kertas dinding, and penutup dinding.

Decorative PVC and WPC interior wall panels are pre-finished tongue-and-groove boards or tiles used to clad interior walls in Malaysian kitchens, bathrooms, living areas, corridors, and offices without requiring plaster, paint, or tile installation. PVC panels offer waterproof, easy-clean surfaces; WPC (wood-plastic composite) panels add a natural timber aesthetic with the moisture resistance of plastic. Typical formats are 200–300 mm wide × 2400–3000 mm long planks or 600 × 600 mm tiles; installed with clips or adhesive. Not structural — decorative cladding use only. Popular for renovation projects in Malaysia due to fast installation and low maintenance. Also traded as PVC wall panel, interior cladding panel, panel dinding hiasan, and panel dinding PVC.

Precast concrete wall coping caps are fitted along the top course of boundary walls, compound perimeter walls, and retaining walls in Malaysian construction to form a weatherproof wall head. The sloped or profiled surface sheds rainwater away from the wall face, reducing water ingress into mortar joints and extending wall service life in Malaysia's tropical rainfall conditions. Available in precast concrete or GRC (glass-fibre reinforced concrete), in plain, textured, or coloured finishes; widths 50–250 mm, lengths 600–1200 mm. Profiles include flat (rectangular), sloped (weather-shed), half-round, and saddle. Classified under HS 6810199000 · import duty 10% · SST 0%. Sold by piece. Also traded as coping cap, concrete coping, penutup puncak dinding, and coping konkrit.