EN | MS

PRODUCT INDEX / MASONRY & FINISHES

Flexible Waterproof Tile Adhesive (C2S1 / C2S2) 20 kg

ADHESIVES

flexible tile adhesive waterproof adhesive swimming pool adhesive pool tile adhesive C2S1 C2S2 perekat fleksibel 防水柔性瓷砖胶 外墙砖胶 perekat kolam renang
Flexible Waterproof Tile Adhesive (C2S1 / C2S2) 20 kg
Request Quote Enterprise Tender Service

WHAT IT IS

Flexible waterproof tile adhesive (C2S1 / C2S2, 20 kg) is a highly polymer-modified cementitious adhesive specified for swimming pools, external building facades, and thermal expansion zones in Malaysian construction. Classified C2S1 (transverse deformation 2.5–5 mm) or C2S2 (≥ 5 mm) per MS ISO 13007-1 with tensile adhesion ≥ 1.0 N/mm². High polymer content accommodates substrate movement and thermal cycling. Sold in 20 kg bags. HS 3214100000 · import duty 5% · SST 5%. Governed by MS ISO 13007-1 (SIRIM). Required for under-floor heating substrates, large facades, and any tile installation subject to regular movement or water immersion.

UNIT OF MEASURE

BAG (PRIMARY) KG

Typical pack size: 20 kg/bag

GRADE & SPECIFICATION

Highly polymer-modified cement-based tile adhesive Class C2S1 (deformable, transverse deformation 2.5–5 mm) or C2S2 (highly deformable, ≥ 5 mm) per MS ISO 13007-1. Used for swimming pools, external facades, under-floor heating substrates. Tensile adhesion ≥ 1.0 N/mm² (C2 class).

CLASSIFICATION

UNSPSC 31201601
CIDB CATEGORY Tile adhesives — C2S1/C2S2 class per MS ISO 13007-1; required for swimming pools and external tiling
UNSPSC codes are issued by the United Nations Global Marketplace (UNGM). CIDB categories are defined by Malaysia's Construction Industry Development Board. These codes are informational — use them to verify, not replace, procurement classification.

TARIFF & TAX — PDK 2025

HS CODE (AHTN) 3214100000
OFFICIAL DESCRIPTION Glaziers' putty, grafting putty, resin cements, caulking compounds and other mastics; painters' fillings
IMPORT DUTY (MFN) 5%
SST 5%
Sourced from PDK 2025 (Customs Duties Order 2025). The import duty shown is the MFN / general rate — preferential rates under FTAs (ATIGA, ACFTA, etc.) are typically lower or zero. SST per the PDK 2025 schedule (a value like 10%/0% means standard/exempt variants). Indicative only — confirm the applicable rate and tax treatment with your licensed customs/tax agent before relying on it. Spotted an error? hello@ttkbuildingmaterials.com

QUICK REFERENCE

PRIMARY UOM

bag

TYPICAL PACK SIZE

20 kg/bag

UNSPSC

31201601

GET QUOTES

Request Quote Tender Service

SUPPLIERS WHO CARRY THIS

MASONRY & FINISHES SUPPLIERS →
Buildmate Hardware

Selangor

Request Quote
Ewarehouse

Kuala Lumpur

Request Quote
MyBuildingMaterial

Selangor

Request Quote
Man Kian Hardware & Trading Sdn Bhd

Selangor

Request Quote
Building Materials Online

Selangor

Request Quote
Builtory

Kuala Lumpur

Request Quote

MALAYSIAN MANUFACTURERS IN THIS CATEGORY

Factories in Malaysia that make Masonry & Finishes products.

AAC Products · Selangor AkzoNobel Paints Malaysia · Negeri Sembilan Alamcon · Perak Amcan Color Coating Industries · Sarawak Asia Roofing Industries (Ajiya) · Johor Bailey Plaster · Selangor Bina Puri AAC Sdn Bhd · Selangor BMI Malaysia (Monier) · Selangor Bostik Findley (Malaysia) Sdn. Bhd. · Negeri Sembilan Ceramica Indah Sdn Bhd (KIMGRES) · Selangor

See all Malaysian building-materials manufacturers →

COMMONLY USED TOGETHER

Materials typically specified alongside Flexible Waterproof Tile Adhesive (C2S1 / C2S2) 20 kg on the same job.

COMPARE SIMILAR PRODUCTS

Cement-Based Tile Adhesive C1 (Normal) 20 kg → Cement-Based Tile Adhesive C2 (Improved) 20 kg → Construction Adhesive (General Purpose / Contact Adhesive) → AAC Thin-Bed Block Adhesive (Bagged) 40 kg →

Send a Quote Request

By submitting, you agree to our Privacy Notice .