Name: Silicone Sealant (Neutral Cure / General Purpose) 310 mL
Brand: ttkbuildingmaterials.com Product Index
Availability: InStock

WHAT IT IS

Neutral-cure silicone sealant (310 mL cartridge) is a one-part RTV (room-temperature vulcanising) sealing compound used for sanitary joints, glazing, and wet-area finishing seals in Malaysian construction. Applied to perimeter seals around sanitary ware, shower cubicle edges, glazing frames, and tile-to-wall joints. Remains permanently flexible; temperature resistance typically −40°C to +180°C; elongation at break ≥ 200%. Equivalent to ASTM C920. Sold per 310 mL cartridge; box of 12. HS 3214100000 · import duty 5% · SST 5%. No specific Malaysian MS for finishing silicone identified. White and clear variants common in Malaysia; brands include Sika SikaSil and Dow Corning.

UNIT OF MEASURE

PIECE (PRIMARY) CARTRIDGE BOX

Typical pack size: 310 mL cartridge; box of 12 cartridges

GRADE & SPECIFICATION

One-part neutral-cure RTV (Room Temperature Vulcanising) silicone sealant for sanitary joints, glazing, and finishing seals. ASTM C920 or equivalent. Temperature resistance typically -40°C to +180°C. Elongation at break ≥ 200%. For sanitary (white/clear) and general construction use.

CLASSIFICATION

UNSPSC 31201712

CIDB CATEGORY Sealants and caulking — finishing sealant; no specific CIDB mandatory MS identified for finishing silicone sealants

UNSPSC codes are issued by the United Nations Global Marketplace (UNGM). CIDB categories are defined by Malaysia's Construction Industry Development Board. These codes are informational — use them to verify, not replace, procurement classification.

TARIFF & TAX — PDK 2025

HS CODE (AHTN) 3214100000

OFFICIAL DESCRIPTION Glaziers' putty, grafting putty, resin cements, caulking compounds and other mastics; painters' fillings

IMPORT DUTY (MFN) 5%

SST 5%

Sourced from PDK 2025 (Customs Duties Order 2025). The import duty shown is the MFN / general rate — preferential rates under FTAs (ATIGA, ACFTA, etc.) are typically lower or zero. SST per the PDK 2025 schedule (a value like 10%/0% means standard/exempt variants). Indicative only — confirm the applicable rate and tax treatment with your licensed customs/tax agent before relying on it. Spotted an error? hello@ttkbuildingmaterials.com