EN | MS

PRODUCT INDEX / MASONRY & FINISHES

Cement-Based Tile Grout CG1 (Normal) 5 kg

GROUT

tile grout grout joint filler tiling grout graut jubin grout jubin 勾缝剂 填缝剂 CG1 grout cement grout floor grout
Cement-Based Tile Grout CG1 (Normal) 5 kg
Request Quote Enterprise Tender Service

WHAT IT IS

Cement-based tile grout CG1 (normal, 5 kg) is a standard-performance coloured cementitious grout used to fill joints between ceramic and porcelain tiles in Malaysian residential and commercial projects. Classified CG1 per MS ISO 13007-3; suitable for joints 2–12 mm wide in interior and sheltered exterior applications. Mixed with water on site; available in multiple colours. Sold in 5 kg bags; also 2 kg and 20 kg. HS 3214100000 · import duty 5% · SST 5%. Governed by MS ISO 13007-3 and MS 1294 code of practice (SIRIM). Not recommended for permanently wet areas or wide movement joints; use CG2WA or RG epoxy grout for those applications.

UNIT OF MEASURE

BAG (PRIMARY) KG

Typical pack size: 5 kg/bag; also 2 kg/bag and 20 kg/bag

GRADE & SPECIFICATION

Cement-based coloured grout Class CG1 (standard performance) per MS ISO 13007-3. Suitable for joints 2–12 mm wide. Meets minimum compressive strength, abrasion resistance, and shrinkage requirements. Not recommended for permanently wet areas or wide movement joints.

CLASSIFICATION

UNSPSC 30111506
CIDB CATEGORY Tile grout — governed by MS ISO 13007-3; SIRIM MS 1294 code of practice for ceramic tile installation
UNSPSC codes are issued by the United Nations Global Marketplace (UNGM). CIDB categories are defined by Malaysia's Construction Industry Development Board. These codes are informational — use them to verify, not replace, procurement classification.

TARIFF & TAX — PDK 2025

HS CODE (AHTN) 3214100000
OFFICIAL DESCRIPTION Glaziers' putty, grafting putty, resin cements, caulking compounds and other mastics; painters' fillings
IMPORT DUTY (MFN) 5%
SST 5%
Sourced from PDK 2025 (Customs Duties Order 2025). The import duty shown is the MFN / general rate — preferential rates under FTAs (ATIGA, ACFTA, etc.) are typically lower or zero. SST per the PDK 2025 schedule (a value like 10%/0% means standard/exempt variants). Indicative only — confirm the applicable rate and tax treatment with your licensed customs/tax agent before relying on it. Spotted an error? hello@ttkbuildingmaterials.com

QUICK REFERENCE

PRIMARY UOM

bag

TYPICAL PACK SIZE

5 kg/bag; also 2 kg/bag and 20 kg/bag

UNSPSC

30111506

GET QUOTES

Request Quote Tender Service

SUPPLIERS WHO CARRY THIS

MASONRY & FINISHES SUPPLIERS →
Buildmate Hardware

Selangor

Request Quote
Ewarehouse

Kuala Lumpur

Request Quote
MyBuildingMaterial

Selangor

Request Quote
Man Kian Hardware & Trading Sdn Bhd

Selangor

Request Quote
Building Materials Online

Selangor

Request Quote
Builtory

Kuala Lumpur

Request Quote

MALAYSIAN MANUFACTURERS IN THIS CATEGORY

Factories in Malaysia that make Masonry & Finishes products.

AAC Products · Selangor AkzoNobel Paints Malaysia · Negeri Sembilan Alamcon · Perak Amcan Color Coating Industries · Sarawak Asia Roofing Industries (Ajiya) · Johor Bailey Plaster · Selangor Bina Puri AAC Sdn Bhd · Selangor BMI Malaysia (Monier) · Selangor Bostik Findley (Malaysia) Sdn. Bhd. · Negeri Sembilan Ceramica Indah Sdn Bhd (KIMGRES) · Selangor

See all Malaysian building-materials manufacturers →

COMMONLY USED TOGETHER

Materials typically specified alongside Cement-Based Tile Grout CG1 (Normal) 5 kg on the same job.

COMPARE SIMILAR PRODUCTS

Cement-Based Tile Grout CG2 (Enhanced) 5 kg → Epoxy Tile Grout (RG) 2 kg → Tile Joint Filler / Decorative Grout (Coloured Cement) 2 kg →

Send a Quote Request

By submitting, you agree to our Privacy Notice .