EN | MS

PRODUCT INDEX / MASONRY & FINISHES

Cement-Based Tile Adhesive C1 (Normal) 20 kg

ADHESIVES

tile adhesive tile cement tile glue perekat jubin cement tile adhesive tile mortar jubin perekat 瓷砖胶 贴砖胶 C1 tile adhesive tile fixing compound
Cement-Based Tile Adhesive C1 (Normal) 20 kg
Request Quote Enterprise Tender Service

WHAT IT IS

Cement-based tile adhesive C1 (normal, 20 kg) is a standard-class cementitious tile fixing mortar used for installing standard ceramic wall and floor tiles on concrete, screed, or cement plaster substrates in Malaysian construction. Classified C1 per MS ISO 13007-1 with tensile adhesion strength ≥ 0.5 N/mm² after normal curing and open time ≥ 20 minutes. Mixed with water on site; applied by notched trowel. Sold in 20 kg bags (also 25 kg). HS 3214100000 · import duty 5% · SST 5%. Governed by MS ISO 13007-1 and MS 1294 code of practice (SIRIM). Suitable for standard-format tiles; upgrade to C2 class for large-format porcelain ≥ 600 × 600 mm.

UNIT OF MEASURE

BAG (PRIMARY) KG

Typical pack size: 20 kg/bag; also 25 kg/bag

GRADE & SPECIFICATION

Cement-based tile adhesive Class C1 (normal adhesive) per MS ISO 13007-1 (Malaysian adoption). Tensile adhesion strength ≥ 0.5 N/mm² after normal curing. Open time ≥ 20 minutes. For standard ceramic wall and floor tiles on concrete/cement plaster substrates.

CLASSIFICATION

UNSPSC 31201601
CIDB CATEGORY Tile adhesives — governed by MS ISO 13007-1 (MS 1294 series code of practice for ceramic tile installation, SIRIM)
UNSPSC codes are issued by the United Nations Global Marketplace (UNGM). CIDB categories are defined by Malaysia's Construction Industry Development Board. These codes are informational — use them to verify, not replace, procurement classification.

TARIFF & TAX — PDK 2025

HS CODE (AHTN) 3214100000
OFFICIAL DESCRIPTION Glaziers' putty, grafting putty, resin cements, caulking compounds and other mastics; painters' fillings
IMPORT DUTY (MFN) 5%
SST 5%
Sourced from PDK 2025 (Customs Duties Order 2025). The import duty shown is the MFN / general rate — preferential rates under FTAs (ATIGA, ACFTA, etc.) are typically lower or zero. SST per the PDK 2025 schedule (a value like 10%/0% means standard/exempt variants). Indicative only — confirm the applicable rate and tax treatment with your licensed customs/tax agent before relying on it. Spotted an error? hello@ttkbuildingmaterials.com

QUICK REFERENCE

PRIMARY UOM

bag

TYPICAL PACK SIZE

20 kg/bag; also 25 kg/bag

UNSPSC

31201601

GET QUOTES

Request Quote Tender Service

SUPPLIERS WHO CARRY THIS

MASONRY & FINISHES SUPPLIERS →
Buildmate Hardware

Selangor

Request Quote
Ewarehouse

Kuala Lumpur

Request Quote
MyBuildingMaterial

Selangor

Request Quote
Man Kian Hardware & Trading Sdn Bhd

Selangor

Request Quote
Building Materials Online

Selangor

Request Quote
Builtory

Kuala Lumpur

Request Quote

MALAYSIAN MANUFACTURERS IN THIS CATEGORY

Factories in Malaysia that make Masonry & Finishes products.

AAC Products · Selangor AkzoNobel Paints Malaysia · Negeri Sembilan Alamcon · Perak Amcan Color Coating Industries · Sarawak Asia Roofing Industries (Ajiya) · Johor Bailey Plaster · Selangor Bina Puri AAC Sdn Bhd · Selangor BMI Malaysia (Monier) · Selangor Bostik Findley (Malaysia) Sdn. Bhd. · Negeri Sembilan Ceramica Indah Sdn Bhd (KIMGRES) · Selangor

See all Malaysian building-materials manufacturers →

COMMONLY USED TOGETHER

Materials typically specified alongside Cement-Based Tile Adhesive C1 (Normal) 20 kg on the same job.

COMPARE SIMILAR PRODUCTS

Cement-Based Tile Adhesive C2 (Improved) 20 kg → Construction Adhesive (General Purpose / Contact Adhesive) → Flexible Waterproof Tile Adhesive (C2S1 / C2S2) 20 kg → AAC Thin-Bed Block Adhesive (Bagged) 40 kg →

Send a Quote Request

By submitting, you agree to our Privacy Notice .