EN | MS

PRODUCT INDEX / MASONRY & FINISHES

Textured Exterior Coating (Spray / Roll-On) 20 L

PAINT

textured paint texture coating sand texture paint roughcast coating exterior texture cat bertekstur cat pasir 砂浆漆 质感漆 弹性外墙涂料 textured wall coating Nippon 1-Plus
Textured Exterior Coating (Spray / Roll-On) 20 L
Request Quote Enterprise Tender Service

WHAT IT IS

Textured exterior coating (spray/roll-on, 20 L) is an acrylic-based masonry finish used to create decorative rough or sand-texture surfaces on external walls in Malaysian construction. Applied by spray gun, roller, or special brush; hides surface defects, small cracks, and substrate irregularities. Coverage approximately 1.5–2.5 m²/litre depending on texture level; crack-bridging capability. Sold in 20 L pails; also 7 L. HS 3209109000 · import duty 25% · SST 10%. No dedicated Malaysian MS for textured coatings; refer to manufacturer TDS. Commonly used on Malaysian terrace houses and shophouses as a durable facade finish; known locally as cat bertekstur or cat pasir.

UNIT OF MEASURE

LITRE (PRIMARY) PAIL

Typical pack size: 20 L/pail; also 7 L/pail

GRADE & SPECIFICATION

Acrylic-based textured masonry coating for external walls. Provides water-shedding rough or fine texture finish; hides surface imperfections. Crack-bridging capability. Coverage approx. 1.5–2.5 m²/litre depending on texture level. No dedicated Malaysian MS — refer to manufacturer TDS.

CLASSIFICATION

UNSPSC 31211504
CIDB CATEGORY Paints and coatings — textured exterior coating; no separate CIDB mandatory MS identified
UNSPSC codes are issued by the United Nations Global Marketplace (UNGM). CIDB categories are defined by Malaysia's Construction Industry Development Board. These codes are informational — use them to verify, not replace, procurement classification.

TARIFF & TAX — PDK 2025

HS CODE (AHTN) 3209109000
OFFICIAL DESCRIPTION Other
IMPORT DUTY (MFN) 25%
SST 10%
Sourced from PDK 2025 (Customs Duties Order 2025). The import duty shown is the MFN / general rate — preferential rates under FTAs (ATIGA, ACFTA, etc.) are typically lower or zero. SST per the PDK 2025 schedule (a value like 10%/0% means standard/exempt variants). Indicative only — confirm the applicable rate and tax treatment with your licensed customs/tax agent before relying on it. Spotted an error? hello@ttkbuildingmaterials.com

QUICK REFERENCE

PRIMARY UOM

litre

TYPICAL PACK SIZE

20 L/pail; also 7 L/pail

UNSPSC

31211504

GET QUOTES

Request Quote Tender Service

SUPPLIERS WHO CARRY THIS

MASONRY & FINISHES SUPPLIERS →
Buildmate Hardware

Selangor

Request Quote
Ewarehouse

Kuala Lumpur

Request Quote
MyBuildingMaterial

Selangor

Request Quote
Man Kian Hardware & Trading Sdn Bhd

Selangor

Request Quote
Building Materials Online

Selangor

Request Quote
Builtory

Kuala Lumpur

Request Quote

MALAYSIAN MANUFACTURERS IN THIS CATEGORY

Factories in Malaysia that make Masonry & Finishes products.

AAC Products · Selangor AkzoNobel Paints Malaysia · Negeri Sembilan Alamcon · Perak Amcan Color Coating Industries · Sarawak Asia Roofing Industries (Ajiya) · Johor Bailey Plaster · Selangor Bina Puri AAC Sdn Bhd · Selangor BMI Malaysia (Monier) · Selangor Bostik Findley (Malaysia) Sdn. Bhd. · Negeri Sembilan Ceramica Indah Sdn Bhd (KIMGRES) · Selangor

See all Malaysian building-materials manufacturers →

COMMONLY USED TOGETHER

Materials typically specified alongside Textured Exterior Coating (Spray / Roll-On) 20 L on the same job.

COMPARE SIMILAR PRODUCTS

Interior Emulsion Paint (Water-Based) 18 L → Exterior Weathershield / Acrylic Masonry Paint 18 L → Gloss Enamel Paint (Alkyd / Oil-Modified) 5 L → Wall Sealer / Primer (Water-Based) 5 L →

Send a Quote Request

By submitting, you agree to our Privacy Notice .