EN | MS

PRODUCT INDEX / MASONRY & FINISHES

Ceramic Wall Tile 200 × 300 mm (Glazed)

TILES

wall tile glazed wall tile bathroom wall tile kitchen wall tile jubin dinding 墙砖 釉面砖 200x300 wall tile 8x12 tile ceramic wall tile
Ceramic Wall Tile 200 × 300 mm (Glazed)
Request Quote Enterprise Tender Service

WHAT IT IS

Ceramic wall tile (200 × 300 mm, glazed) is a glazed interior wall finish used for bathroom, toilet, and kitchen backsplash surfaces in Malaysian construction. Classified to MS ISO 13006:2020 Group BIII (water absorption > 10%), it is rated for internal wet-area walls only and must not be used on floor surfaces due to low abrasion resistance (class 0). Supplied at approximately 1.2 m²/box (20 pieces per box). HS 6907409200 · import duty 10% · SST 10%. CIDB Schedule 4 (Act 520) regulated; SIRIM QAS certification required. Known locally as jubin dinding; sized 200 × 300 mm (8" × 12"). Install with C1 tile adhesive on cement plaster or concrete substrates.

UNIT OF MEASURE

M² (PRIMARY) BOX PIECE

Typical pack size: Approx. 1.2 m²/box (20 pcs × 200×300 mm); 0.06 m²/pc

GRADE & SPECIFICATION

Glazed ceramic wall tile Group BIII (water absorption > 10%) or BIIb to MS ISO 13006:2020. Suitable for internal wet-area walls only (not floors). Low abrasion resistance (class 0).

CLASSIFICATION

UNSPSC 30161706
CIDB CATEGORY Ceramic tiles — regulated mandatory standard under MS ISO 13006:2020 (CIDB Schedule 4, Act 520); SIRIM QAS certified
UNSPSC codes are issued by the United Nations Global Marketplace (UNGM). CIDB categories are defined by Malaysia's Construction Industry Development Board. These codes are informational — use them to verify, not replace, procurement classification.

TARIFF & TAX — PDK 2025

HS CODE (AHTN) 6907409200
OFFICIAL DESCRIPTION Glazed
IMPORT DUTY (MFN) 10%
SST 10%
Sourced from PDK 2025 (Customs Duties Order 2025). The import duty shown is the MFN / general rate — preferential rates under FTAs (ATIGA, ACFTA, etc.) are typically lower or zero. SST per the PDK 2025 schedule (a value like 10%/0% means standard/exempt variants). Indicative only — confirm the applicable rate and tax treatment with your licensed customs/tax agent before relying on it. Spotted an error? hello@ttkbuildingmaterials.com

QUICK REFERENCE

PRIMARY UOM

TYPICAL PACK SIZE

Approx. 1.2 m²/box (20 pcs × 200×300 mm); 0.06 m²/pc

UNSPSC

30161706

GET QUOTES

Request Quote Tender Service

SUPPLIERS WHO CARRY THIS

MASONRY & FINISHES SUPPLIERS →
Buildmate Hardware

Selangor

Request Quote
Ewarehouse

Kuala Lumpur

Request Quote
MyBuildingMaterial

Selangor

Request Quote
Man Kian Hardware & Trading Sdn Bhd

Selangor

Request Quote
Building Materials Online

Selangor

Request Quote
Builtory

Kuala Lumpur

Request Quote

MALAYSIAN MANUFACTURERS IN THIS CATEGORY

Factories in Malaysia that make Masonry & Finishes products.

AAC Products · Selangor AkzoNobel Paints Malaysia · Negeri Sembilan Alamcon · Perak Amcan Color Coating Industries · Sarawak Asia Roofing Industries (Ajiya) · Johor Bailey Plaster · Selangor Bina Puri AAC Sdn Bhd · Selangor BMI Malaysia (Monier) · Selangor Bostik Findley (Malaysia) Sdn. Bhd. · Negeri Sembilan Ceramica Indah Sdn Bhd (KIMGRES) · Selangor

See all Malaysian building-materials manufacturers →

COMMONLY USED TOGETHER

Materials typically specified alongside Ceramic Wall Tile 200 × 300 mm (Glazed) on the same job.

COMPARE SIMILAR PRODUCTS

Ceramic Floor Tile 300 × 300 mm (Glazed) → Porcelain Homogeneous Floor Tile 600 × 600 mm → Mosaic Tile Sheet 300 × 300 mm (Porcelain or Ceramic) → Vinyl / PVC Floor Tile (Plastic Floor Covering) →

Send a Quote Request

By submitting, you agree to our Privacy Notice .