EN | MS

PRODUCT INDEX / MASONRY & FINISHES

AAC Autoclaved Aerated Concrete Lightweight Block

MAPPING UNDER REVIEW

BRICKS

AAC block lightweight block aerated block autoclaved aerated concrete foamcrete block blok ringan blok AAC 加气混凝土砌块 蒸压轻质砌块 ALC block
AAC Autoclaved Aerated Concrete Lightweight Block
Request Quote Enterprise Tender Service

WHAT IT IS

AAC autoclaved aerated concrete lightweight block is a factory-produced masonry unit made by aerating a cement-lime-silica slurry and steam-curing under pressure, used for partition and infill walls in modern Malaysian high-rise and landed residential construction. Density class D500–D700 (500–700 kg/m³); compressive strength class CS1–CS4; thermal conductivity ≈ 0.12–0.22 W/(m·K). Common sizes: 600 × 200 × 100/125/150/200 mm; approximately 120–180 pieces per pallet. No HS data present. General properties follow BS EN 771-4; Malaysian practice references SIRIM certification. Installed with thin-bed adhesive mortar (1–3 mm joint) for improved thermal performance.

UNIT OF MEASURE

PC (PRIMARY) PALLET

Typical pack size: Common sizes: 600 × 200 × 100/125/150/200 mm; approx. 120–180 pcs/pallet depending on thickness

GRADE & SPECIFICATION

Autoclaved aerated concrete masonry unit. Density class D500–D700 (500–700 kg/m³); compressive strength class CS1–CS4. Thermal conductivity ≈ 0.12–0.22 W/(m·K). General properties follow BS EN 771-4 (AAC masonry units); Malaysian practice references SIRIM certification.

TAX — INDICATIVE ONLY

AAC blocks are generally SST-exempt as basic construction material. Confirm with your licensed tax agent.

Suggested SST treatment — indicative only. Confirm with your licensed tax agent. Tax positions change and this is not a tax ruling. ttkbuildingmaterials.com accepts no liability for tax decisions made in reliance on this information. Spotted anything wrong in this listing (spec, classification code, or tax)? Email hello@ttkbuildingmaterials.com and we will review it.

HS CODE — INDICATIVE ONLY

6904.90 (Other ceramic building bricks/blocks) — AAC units are cementitious, not ceramic; medium confidence; may also fall under 6810 (articles of cement/concrete/artificial stone)

Indicative HS code for import classification. Verify with your customs agent or Customs Malaysia (Jabatan Kastam) before use.

QUICK REFERENCE

PRIMARY UOM

pc

TYPICAL PACK SIZE

Common sizes: 600 × 200 × 100/125/150/200 mm; approx. 120–180 pcs/pallet depending on thickness

GET QUOTES

Request Quote Tender Service

SUPPLIERS WHO CARRY THIS

MASONRY & FINISHES SUPPLIERS → STRUCTURAL MATERIALS SUPPLIERS →
BuildPro Malaysia

Selangor

Request Quote
Buildmate Hardware

Selangor

Request Quote
Ewarehouse

Kuala Lumpur

Request Quote
MyBuildingMaterial

Selangor

Request Quote
Man Kian Hardware & Trading Sdn Bhd

Selangor

Request Quote
Building Materials Online

Selangor

Request Quote

MALAYSIAN MANUFACTURERS IN THIS CATEGORY

Factories in Malaysia that make Masonry & Finishes products.

AAC Products · Selangor AkzoNobel Paints Malaysia · Negeri Sembilan Alamcon · Perak Amcan Color Coating Industries · Sarawak Asia Roofing Industries (Ajiya) · Johor Bailey Plaster · Selangor Bina Puri AAC Sdn Bhd · Selangor BMI Malaysia (Monier) · Selangor Bostik Findley (Malaysia) Sdn. Bhd. · Negeri Sembilan Ceramica Indah Sdn Bhd (KIMGRES) · Selangor

See all Malaysian building-materials manufacturers →

COMMONLY USED TOGETHER

Materials typically specified alongside AAC Autoclaved Aerated Concrete Lightweight Block on the same job.

COMPARE SIMILAR PRODUCTS

Common Clay Brick (Batu Merah) → Cement Sand Brick (Batu Simen) → Ceramic Facing Brick (Decorative / Exposed) → Ventilation Brick / Louvre Block →

Send a Quote Request

By submitting, you agree to our Privacy Notice .