PRODUCT INDEX / ROOFING & FACADE
WATERPROOF MEMBRANE
TPO Single-Ply Roofing Membrane is a thermoplastic polyolefin flat-roof membrane used on commercial and industrial rooftops in Malaysian construction. Manufactured to ASTM D6878 (Standard Specification for Thermoplastic Polyolefin Roofing). Available in roll widths of 1.5, 2.0, and 3.0 m; lengths 15–25 m per roll; thickness 1.14 mm (45 mil), 1.52 mm (60 mil), or 2.03 mm (80 mil). White or light-coloured top surface provides cool-roof solar reflectance, reducing building cooling loads in Malaysia's tropical climate. Seams are heat-welded without open flame, eliminating torch-on fire risk. Installed by mechanical fastening or full adhesion. Increasingly preferred over torch-on bituminous membranes for new-build flat roofs.
Typical pack size: Roll width: 1.5 m, 2.0 m, 3.0 m; length: 15–25 m/roll; thickness: 1.14 mm (45 mil), 1.52 mm (60 mil), 2.03 mm (80 mil)
Thermoplastic Polyolefin (TPO) single-ply membrane to ASTM D6878 (Standard Specification for Thermoplastic Polyolefin Roofing). White or light-coloured top surface (cool roof). Heat-welded seams. Mechanically fastened or fully adhered. Suppliers in MY: BMI (Siplast), Swissma, Sika, H&M Waterproofing.
Plastics/waterproofing product — indicatively subject to Sales Tax under Malaysian SST. Suggested treatment: confirm with your licensed tax agent; tax positions change.
Suggested SST treatment — indicative only. Confirm with your licensed tax agent. Tax positions change and this is not a tax ruling. ttkbuildingmaterials.com accepts no liability for tax decisions made in reliance on this information. Spotted anything wrong in this listing (spec, classification code, or tax)? Email hello@ttkbuildingmaterials.com and we will review it.3921.90 (Other plates/sheets/film of plastics — TPO membrane classified under HS Chapter 39)
Indicative HS code for import classification. Verify with your customs agent or Customs Malaysia (Jabatan Kastam) before use.PRIMARY UOM
roll
TYPICAL PACK SIZE
Roll width: 1.5 m, 2.0 m, 3.0 m; length: 15–25 m/roll; thickness: 1.14 mm (45 mil), 1.52 mm (60 mil), 2.03 mm (80 mil)
CATEGORY
Roofing & FacadeUNSPSC
30151505
Factories in Malaysia that make Roofing & Facade products.
Materials typically specified alongside TPO Single-Ply Roofing Membrane (Thermoplastic Polyolefin) on the same job.