Name: Cementitious Waterproofing Compound (Polymer Cement, Rigid / Flexible)
Brand: ttkbuildingmaterials.com Product Index
Availability: InStock

WHAT IT IS

Cementitious Waterproofing Compound is a polymer-modified cement-based slurry used to form a crystalline or flexible waterproof barrier on concrete, masonry, and blockwork in Malaysian construction. Applied by brush or trowel in minimum two coats to achieve a pinhole-free film. Rigid grades (Type I) suit non-moving substrates such as water tanks, basements, and retaining walls; flexible two-component grades (Type II) accommodate minor structural movement at roof decks, wet areas, and planter boxes. Supplied as 25 kg single-component bags or 18–36 kg two-component kits (powder + liquid). Typically specified to BS EN 14891 or manufacturer data sheet; no specific MS standard. Compatible with concrete, brick, and block substrates without primer on most formulations.

UNIT OF MEASURE

KG (PRIMARY) BAG SET

Typical pack size: 25 kg bag (single component) or 18–36 kg kit (two-component powder + liquid)

GRADE & SPECIFICATION

Polymer-modified cementitious slurry; rigid grades (Type I) for non-moving substrates; flexible grades (Type II) with higher polymer content for joints and moving cracks. Applied in minimum two coats to achieve pinhole-free film. No specific MS number — typically specified to BS EN 14891 or manufacturer data sheet.

TAX — INDICATIVE ONLY

Goods — indicatively subject to SST at applicable rate; confirm with licensed tax agent.

Suggested SST treatment — indicative only. Confirm with your licensed tax agent. Tax positions change and this is not a tax ruling. ttkbuildingmaterials.com accepts no liability for tax decisions made in reliance on this information. Spotted anything wrong in this listing (spec, classification code, or tax)? Email hello@ttkbuildingmaterials.com and we will review it.