Name: GI L-Bracket / Truss Connector Plate (Light Gauge, Roof Truss Fixing)
Brand: ttkbuildingmaterials.com Product Index
Availability: InStock

WHAT IT IS

GI L-bracket / truss connector plate is a press-formed hot-dip galvanised mild steel angle bracket used to connect roof battens, C-purlins, and light-gauge truss components at corners and junctions in Malaysian lightweight-steel roof framing. Available in 2 in × 4 in and 1.5 in × 3 in sizes in 18-gauge and 16-gauge GI; sold per piece or in boxes. Pre-punched hole pattern accepts tek screws, roofing screws, or galvanised nails for rapid site assembly without welding. Suitable for secondary structural connections in light-gauge roofing systems; not engineered for primary truss member connections, which require dedicated structural connector design.

UNIT OF MEASURE

PIECE (PRIMARY) BOX

Typical pack size: Sold per piece or in boxes; common sizes 2 in × 4 in, 1.5 in × 3 in; 18-gauge or 16-gauge GI

GRADE & SPECIFICATION

Press-formed hot-dip galvanised mild steel; L-profile with pre-punched holes for tek screws or nails. Used to connect light-gauge C-purlins, battens, and light truss members at angle joints. Not a structural connector for primary truss members — those require engineered connection designs.

TAX — INDICATIVE ONLY

Goods — indicatively subject to SST at applicable rate; confirm with licensed tax agent.

Suggested SST treatment — indicative only. Confirm with your licensed tax agent. Tax positions change and this is not a tax ruling. ttkbuildingmaterials.com accepts no liability for tax decisions made in reliance on this information. Spotted anything wrong in this listing (spec, classification code, or tax)? Email hello@ttkbuildingmaterials.com and we will review it.