Name: Standing Seam Metal Roofing (Clip-Lock / Concealed Fix)
Brand: ttkbuildingmaterials.com Product Index
Availability: InStock

WHAT IT IS

Standing Seam Metal Roofing is a concealed-fix clip-lock metal roofing system used for commercial, industrial, and premium residential buildings in Malaysian construction. Classified under HS 7210701200, import duty 15%, SST 0%. Raised standing seams conceal fasteners completely, eliminating water ingress at fixings and delivering a clean architectural finish. Panels are roll-formed from PPGI or Zincalume (ZAM) substrate, G550 high-tensile steel, 0.42–0.70 mm BMT, with PVDF paint systems for coastal and demanding environments. Panel widths range from approximately 300–760 mm with custom-cut lengths up to 25 m. Suitable for very low slopes down to 1.5°–3°. Compatible with rockwool or glasswool insulation between purlins for thermal and acoustic control.

UNIT OF MEASURE

M² (PRIMARY) M (LENGTH) SHEET

Typical pack size: Panel coverage width ~300–760 mm (profile dependent); custom-cut lengths up to 25+ m; 0.42–0.70 mm BMT

GRADE & SPECIFICATION

PPGI or COLORBOND®-equivalent; G550 high-tensile steel; Zincalume® (ZAM) or Galvabond substrate available. PVDF paint system for coastal/demanding environments. Common profiles: Clip Lock 730/760, Swissma Clip-Loc. Low-slope capable down to 1.5°–3°.

CLASSIFICATION

UNSPSC 30151514

CIDB CATEGORY Roofing materials (metal — standing seam concealed-fix system)

UNSPSC codes are issued by the United Nations Global Marketplace (UNGM). CIDB categories are defined by Malaysia's Construction Industry Development Board. These codes are informational — use them to verify, not replace, procurement classification.

TARIFF & TAX — PDK 2025

HS CODE (AHTN) 7210701200

OFFICIAL DESCRIPTION Painted after coating with zinc

IMPORT DUTY (MFN) 15%

SST 0%

Sourced from PDK 2025 (Customs Duties Order 2025). The import duty shown is the MFN / general rate — preferential rates under FTAs (ATIGA, ACFTA, etc.) are typically lower or zero. SST per the PDK 2025 schedule (a value like 10%/0% means standard/exempt variants). Indicative only — confirm the applicable rate and tax treatment with your licensed customs/tax agent before relying on it. Spotted an error? hello@ttkbuildingmaterials.com