Name: Fibre Cement Cladding Board (Exterior)
Brand: ttkbuildingmaterials.com Product Index
Availability: InStock

WHAT IT IS

Fibre Cement Cladding Board is a cellulose fibre-cement panel used as exterior wall cladding, lining boards, and facade panels on residential and commercial buildings in Malaysian construction. Classified under HS 6811822000, import duty 10%, SST 5%. Composed of Portland cement, cellulose fibre, and silica; provides weather resistance, termite resistance, and dimensional stability. UAC Berhad, established 1963, is the dominant Malaysian manufacturer offering Flatboard (smooth and textured) and Fineline (woodgrain) ranges. Standard sheet sizes: 1200 × 2400 mm or 1200 × 3000 mm; thickness 4.5, 6, 8, 9, 12, 15, or 18 mm. Density approximately 1.2–1.4 g/cm³. Suitable for painted finishes or factory-primed cladding systems. CIDB recognised wall cladding material.

UNIT OF MEASURE

SHEET (PRIMARY) M²

Typical pack size: Standard sheet: 1200 × 2400 mm, 1200 × 3000 mm; thickness 4.5 mm, 6 mm, 8 mm, 9 mm, 12 mm, 15 mm, 18 mm; bundled per pallet

GRADE & SPECIFICATION

Cellulose fibre-cement to HS 6811.82. UAC Berhad — leading Malaysian manufacturer established 1963 — product range includes Flatboard (smooth/textured) and Fineline (woodgrain). Complies with internal UAC standards; no specific current MS standard cited for cellulose FC board cladding. Density approx. 1.2–1.4 g/cm³.

CLASSIFICATION

UNSPSC 30151802

CIDB CATEGORY Wall cladding materials (fibre cement board)

UNSPSC codes are issued by the United Nations Global Marketplace (UNGM). CIDB categories are defined by Malaysia's Construction Industry Development Board. These codes are informational — use them to verify, not replace, procurement classification.

TARIFF & TAX — PDK 2025

HS CODE (AHTN) 6811822000

OFFICIAL DESCRIPTION For roofing, facing or partitioning

IMPORT DUTY (MFN) 10%

SST 5%

Sourced from PDK 2025 (Customs Duties Order 2025). The import duty shown is the MFN / general rate — preferential rates under FTAs (ATIGA, ACFTA, etc.) are typically lower or zero. SST per the PDK 2025 schedule (a value like 10%/0% means standard/exempt variants). Indicative only — confirm the applicable rate and tax treatment with your licensed customs/tax agent before relying on it. Spotted an error? hello@ttkbuildingmaterials.com