EN | MS

PRODUCT INDEX / ROOFING & FACADE

uPVC Downpipe (Rainwater Downpipe)

MAPPING UNDER REVIEW

GUTTERS

uPVC downpipe PVC downpipe plastic downpipe UPVC downspout rainwater pipe paip turun PVC paip turun uPVC PVC落水管 塑料落水管
uPVC Downpipe (Rainwater Downpipe)
Request Quote Enterprise Tender Service

WHAT IT IS

uPVC Downpipe is an above-ground thermoplastic rainwater pipe used to convey roof run-off from gutters to the drainage system on Malaysian residential buildings. Classified under HS 3917230000, import duty 20%, SST 5%. Manufactured from UV-stabilised uPVC to BS EN 12200-1 (Plastics piping systems for above-ground rainwater drainage — PVC-U). Available in round sections: 56, 82, and 110 mm; supplied in 3 m or 6 m lengths. Lightweight and low-cost; matched to uPVC gutter systems in profile and colour (standard grey; also available in brown). Bends, shoes, and offset brackets allow routing around building features. The standard downpipe specification in Malaysian terraced and semi-detached residential construction.

UNIT OF MEASURE

M (PRIMARY) LENGTH

Typical pack size: 3 m or 6 m lengths; round: 56 mm, 82 mm, 110 mm; to BS EN 12200-1 (thermoplastic rainwater piping systems)

GRADE & SPECIFICATION

uPVC to BS EN 12200-1 (Plastics piping systems for above-ground rainwater drainage — PVC-U). UV-stabilised. Brands: Paling, Arensi-Marley. Available in standard grey/brown; compatible with uPVC gutter systems.

CLASSIFICATION

UNSPSC 30151701
CIDB CATEGORY Roofing accessories (downpipe — uPVC)
UNSPSC codes are issued by the United Nations Global Marketplace (UNGM). CIDB categories are defined by Malaysia's Construction Industry Development Board. These codes are informational — use them to verify, not replace, procurement classification.

TARIFF & TAX — PDK 2025

HS CODE (AHTN) 3917230000 (MEDIUM CONFIDENCE)
OFFICIAL DESCRIPTION Of polymers of vinyl chloride
IMPORT DUTY (MFN) 20%
SST 5%
Sourced from PDK 2025 (Customs Duties Order 2025). The import duty shown is the MFN / general rate — preferential rates under FTAs (ATIGA, ACFTA, etc.) are typically lower or zero. SST per the PDK 2025 schedule (a value like 10%/0% means standard/exempt variants). Indicative only — confirm the applicable rate and tax treatment with your licensed customs/tax agent before relying on it. Spotted an error? hello@ttkbuildingmaterials.com

QUICK REFERENCE

PRIMARY UOM

m

TYPICAL PACK SIZE

3 m or 6 m lengths; round: 56 mm, 82 mm, 110 mm; to BS EN 12200-1 (thermoplastic rainwater piping systems)

CATEGORY

Roofing & Facade

UNSPSC

30151701

GET QUOTES

Request Quote Tender Service

SUPPLIERS WHO CARRY THIS

ROOFING & FACADE SUPPLIERS →
Asia Hardware

Selangor

Request Quote
Aathaworld

Selangor

Request Quote
Weldon Roof Industries

Selangor

Request Quote
Monier Malaysia

Selangor

Request Quote
Saint-Gobain Malaysia

Selangor

Request Quote
DriTech

Selangor

Request Quote

MALAYSIAN MANUFACTURERS IN THIS CATEGORY

Factories in Malaysia that make Roofing & Facade products.

Amcan Color Coating Industries · Sarawak Array Metal · Selangor Asia Roofing Industries (Ajiya) · Johor Astino Berhad · Penang BMI Malaysia (Monier) · Selangor Bostik Findley (Malaysia) Sdn. Bhd. · Negeri Sembilan Chemind Industries Sdn. Bhd. · Selangor Colourcoil Industries · Sabah Denka Construction Solutions Malaysia Sdn. Bhd. · Selangor Foil Laminate Industries Sdn Bhd · Pulau Pinang

See all Malaysian building-materials manufacturers →

COMMONLY USED TOGETHER

Materials typically specified alongside uPVC Downpipe (Rainwater Downpipe) on the same job.

COMPARE SIMILAR PRODUCTS

Aluminium Rain Gutter (Half-Round / Box Profile) → uPVC Rain Gutter System → Aluminium Downpipe (Rainwater Pipe) → uPVC Rain Gutter Fittings Set (Brackets, End Stoppers, Outlets, Mitre Joints) →

Send a Quote Request

By submitting, you agree to our Privacy Notice .