EN | MS

PRODUCT INDEX / ROOFING & FACADE

Aluminium Downpipe (Rainwater Pipe)

GUTTERS

aluminium downpipe aluminum downspout rain downpipe downpipe downspout paip turun aluminium paip air hujan 铝制落水管 落水管
Aluminium Downpipe (Rainwater Pipe)
Request Quote Enterprise Tender Service

WHAT IT IS

Aluminium Downpipe is an extruded aluminium rainwater pipe used to channel collected roof run-off vertically from gutters to the ground drainage system on Malaysian buildings. Classified under HS 7610909900, import duty 25%, SST 5%. Extruded from alloy 6063 or equivalent; available in round sections (63, 75, 100 mm diameter) and square sections (65×65 mm, 75×75 mm). Supplied in 3 m or 6 m lengths. Matched in profile and colour to aluminium gutter systems. Clips and brackets at 1 m centres recommended. Must comply with Building Uniform By-Law provisions for rainwater disposal. Powder-coated or mill-finish; corrosion-resistant in Malaysia's humid tropical environment.

UNIT OF MEASURE

M (PRIMARY) LENGTH PIECE

Typical pack size: 3 m or 6 m lengths; round: 63 mm, 75 mm, 100 mm; square: 65×65 mm, 75×75 mm

GRADE & SPECIFICATION

Extruded aluminium (alloy 6063 or equivalent); round or square cross-section. Compatible with aluminium gutter systems from Roofseal, Arensi-Marley. Powder-coated or mill finish. Clips/brackets at 1 m centres recommended.

CLASSIFICATION

UNSPSC 30151701
CIDB CATEGORY Roofing accessories (downpipe — aluminium)
UNSPSC codes are issued by the United Nations Global Marketplace (UNGM). CIDB categories are defined by Malaysia's Construction Industry Development Board. These codes are informational — use them to verify, not replace, procurement classification.

TARIFF & TAX — PDK 2025

HS CODE (AHTN) 7610909900
OFFICIAL DESCRIPTION Other
IMPORT DUTY (MFN) 25%
SST 5%
Sourced from PDK 2025 (Customs Duties Order 2025). The import duty shown is the MFN / general rate — preferential rates under FTAs (ATIGA, ACFTA, etc.) are typically lower or zero. SST per the PDK 2025 schedule (a value like 10%/0% means standard/exempt variants). Indicative only — confirm the applicable rate and tax treatment with your licensed customs/tax agent before relying on it. Spotted an error? hello@ttkbuildingmaterials.com

QUICK REFERENCE

PRIMARY UOM

m

TYPICAL PACK SIZE

3 m or 6 m lengths; round: 63 mm, 75 mm, 100 mm; square: 65×65 mm, 75×75 mm

CATEGORY

Roofing & Facade

UNSPSC

30151701

GET QUOTES

Request Quote Tender Service

SUPPLIERS WHO CARRY THIS

ROOFING & FACADE SUPPLIERS →
Asia Hardware

Selangor

Request Quote
Aathaworld

Selangor

Request Quote
Weldon Roof Industries

Selangor

Request Quote
Monier Malaysia

Selangor

Request Quote
Saint-Gobain Malaysia

Selangor

Request Quote
DriTech

Selangor

Request Quote

MALAYSIAN MANUFACTURERS IN THIS CATEGORY

Factories in Malaysia that make Roofing & Facade products.

Amcan Color Coating Industries · Sarawak Array Metal · Selangor Asia Roofing Industries (Ajiya) · Johor Astino Berhad · Penang BMI Malaysia (Monier) · Selangor Bostik Findley (Malaysia) Sdn. Bhd. · Negeri Sembilan Chemind Industries Sdn. Bhd. · Selangor Colourcoil Industries · Sabah Denka Construction Solutions Malaysia Sdn. Bhd. · Selangor Foil Laminate Industries Sdn Bhd · Pulau Pinang

See all Malaysian building-materials manufacturers →

COMMONLY USED TOGETHER

Materials typically specified alongside Aluminium Downpipe (Rainwater Pipe) on the same job.

COMPARE SIMILAR PRODUCTS

Aluminium Rain Gutter (Half-Round / Box Profile) → uPVC Rain Gutter System → uPVC Downpipe (Rainwater Downpipe) → uPVC Rain Gutter Fittings Set (Brackets, End Stoppers, Outlets, Mitre Joints) →

Send a Quote Request

By submitting, you agree to our Privacy Notice .