Name: Aluminium Composite Panel (ACP) — Exterior Facade Cladding
Brand: ttkbuildingmaterials.com Product Index
Availability: InStock

WHAT IT IS

Aluminium Composite Panel (ACP) is a facade cladding material consisting of two pre-painted aluminium skins bonded to a core, used extensively for exterior building facades, canopies, column cladding, and signage in Malaysian commercial and high-rise construction. ACP panels combine low weight with flat rigidity, enabling large-format architectural finishes. Standard sheet sizes are 1220 × 2440 mm or 1500 × 4000 mm; exterior panels are typically 4 mm thick with 0.3–0.5 mm aluminium skins. PVDF-painted exterior ACPs deliver 10+ year colour durability in Malaysia's tropical UV and monsoon conditions. Fire-retardant (FR/A2) mineral-filled core variants are required for buildings over 10 m in height per Malaysian fire code guidance. PE-core panels are limited to interior and low-rise use.

UNIT OF MEASURE

SHEET (PRIMARY) M²

Typical pack size: Standard sheet: 1220 × 2440 mm or 1500 × 4000 mm; thickness 3 mm (interior), 4 mm (exterior standard); aluminium skin 0.3–0.5 mm; PE or FR (fire-retardant) core

GRADE & SPECIFICATION

Aluminium composite panel to HS 7606.12. Two aluminium skins (alloy 3105 or 5052) bonded to polyethylene (PE) or fire-retardant (FR/A2) mineral-filled core. PVDF paint finish for exterior use. Classified under 7606 as aluminium plate/sheet. FR core required for buildings >10 m by Malaysian fire code guidance.

CLASSIFICATION

UNSPSC 30151802

CIDB CATEGORY Wall cladding materials (aluminium composite panel — facade)

UNSPSC codes are issued by the United Nations Global Marketplace (UNGM). CIDB categories are defined by Malaysia's Construction Industry Development Board. These codes are informational — use them to verify, not replace, procurement classification.

TAX — INDICATIVE ONLY

Aluminium article — indicatively 10% Sales Tax or exemption may apply. Suggested treatment: confirm with your licensed tax agent; tax positions change.

Suggested SST treatment — indicative only. Confirm with your licensed tax agent. Tax positions change and this is not a tax ruling. ttkbuildingmaterials.com accepts no liability for tax decisions made in reliance on this information. Spotted anything wrong in this listing (spec, classification code, or tax)? Email hello@ttkbuildingmaterials.com and we will review it.

HS CODE — INDICATIVE ONLY

7606.12 (Aluminium alloy plates/sheets/strip — includes ACP; sub-code 76061230 confirmed for ACP)

Indicative HS code for import classification. Verify with your customs agent or Customs Malaysia (Jabatan Kastam) before use.

QUICK REFERENCE

PRIMARY UOM

sheet

TYPICAL PACK SIZE

Standard sheet: 1220 × 2440 mm or 1500 × 4000 mm; thickness 3 mm (interior), 4 mm (exterior standard); aluminium skin 0.3–0.5 mm; PE or FR (fire-retardant) core