Name: HDPE Pressure Pipe PE100 (MS 1058 / ISO 4427)
Brand: ttkbuildingmaterials.com Product Index
Availability: InStock

WHAT IT IS

HDPE pressure pipe PE100 (MS 1058 / ISO 4427) is a high-density polyethylene pipe for potable water mains, building services main supplies, and underground water distribution in Malaysian construction. PE100 material achieves higher pressure ratings at thinner wall thickness compared to PE80. Butt-fusion or electrofusion jointing — no solvents required. Conforms to MS 1058:Part 2:2023. Available in SDR 11 (PN 16), SDR 17 (PN 10), SDR 26 (PN 6.3); diameters 20-630 mm; lengths 6 m or 12 m. Suitable for trenchless installation. Also known as paip HDPE or PE100 pipe. HS 3917210000 · duty 20% · SST 5%.

UNIT OF MEASURE

LENGTH (PRIMARY) M

Typical pack size: 6 m or 12 m coils/lengths; diameters 20 mm – 630 mm; SDR ratings SDR 11, SDR 17, SDR 26

GRADE & SPECIFICATION

PE100 material to MS 1058:Part 2:2023 / ISO 4427. SDR 11 (PN 16), SDR 17 (PN 10), SDR 26 (PN 6.3). Butt-fusion or electrofusion joining.

CLASSIFICATION

UNSPSC 40171520

CIDB CATEGORY Pipes and Fittings — HDPE pressure pipe (water supply and building services)

UNSPSC codes are issued by the United Nations Global Marketplace (UNGM). CIDB categories are defined by Malaysia's Construction Industry Development Board. These codes are informational — use them to verify, not replace, procurement classification.

TARIFF & TAX — PDK 2025

HS CODE (AHTN) 3917210000

OFFICIAL DESCRIPTION Of polymers of ethylene

IMPORT DUTY (MFN) 20%

SST 5%

Sourced from PDK 2025 (Customs Duties Order 2025). The import duty shown is the MFN / general rate — preferential rates under FTAs (ATIGA, ACFTA, etc.) are typically lower or zero. SST per the PDK 2025 schedule (a value like 10%/0% means standard/exempt variants). Indicative only — confirm the applicable rate and tax treatment with your licensed customs/tax agent before relying on it. Spotted an error? hello@ttkbuildingmaterials.com