MEP Fittings & Fixtures

HDPE pressure pipe PE100 (MS 1058 / ISO 4427) is a high-density polyethylene pipe for potable water mains, building services main supplies, and underground water distribution in Malaysian construction. PE100 material achieves higher pressure ratings at thinner wall thickness compared to PE80. Butt-fusion or electrofusion jointing — no solvents required. Conforms to MS 1058:Part 2:2023. Available in SDR 11 (PN 16), SDR 17 (PN 10), SDR 26 (PN 6.3); diameters 20-630 mm; lengths 6 m or 12 m. Suitable for trenchless installation. Also known as paip HDPE or PE100 pipe. HS 3917210000 · duty 20% · SST 5%.

PPR pipe PN20 (polypropylene random copolymer) is the preferred MEP-specification internal water pipe for hot and cold distribution in Malaysian commercial and multi-storey residential buildings. PN20 (S2.5) rated for hot water service up to 60°C continuous, 70°C peak. Conforms to MS 2286 and ISO 15874. Joined by hot-tool socket fusion at 260°C — no solvents, fully fused joint. SIRIM and SPAN certified. Colour-coded: green (cold water), red/orange (hot water insulated). Diameters 20-110 mm, 4 m lengths. Also known as paip PPR or PP-R pipe. HS 3917220000 · duty 20% · SST 5%.

PPR socket fusion equal tee (20-63 mm) is a polypropylene random copolymer pipe fitting for branching hot and cold water distribution pipework in Malaysian commercial and multi-storey residential buildings. Hot-tool socket fusion at 260°C creates a permanent, pressure-tight, leak-free joint with no solvents or mechanical seals. Conforms to MS 2286 / ISO 15874; compatible with PPR pipe of the same PN rating. Sizes 20, 25, 32, 40, 50, and 63 mm outside diameter. Also known as sambungan tee PPR or PPR fitting tee. HS 3917339000 · duty 20% · SST 5%.

uPVC underground drainage pipe (MS 1228 / BS EN 1401) is the standard gravity sewer, stormwater drain, and site drainage pipe for building projects in Malaysia. Ring-stiffness class SN4 or SN8 for below-ground use; rubber-ring joint (RRJ) push-fit connections allow ground movement. Common sizes: DN 100, DN 150, DN 200, DN 250, DN 300; lengths 3 m or 6 m. Used for below-slab drain runs, external drainage networks, and site utility connections in Malaysian residential and commercial construction. Also known as paip longkang bawah tanah or underground drain pipe. HS 3917230000 · duty 20% · SST 5%.

Perforated steel cable tray (hot-dip galvanised, 50 mm depth) is used to support and route electrical and data cables in commercial and industrial buildings across Malaysia. Hot-dip galvanised (HDG) per MS EN ISO 1461; steel thickness 1.2-1.5 mm (heavy-duty 2.0 mm). Conforms to BS EN 50085 / IEC 61537. Widths 100-600 mm; 3 m lengths. Installed on threaded rod hangers or wall brackets; accessories include bends, tees, reducers, risers, and covers. Also known as dulang kabel or GI cable tray. HS 7308906000 · duty 10% · SST 5%.

Steel cable ladder (hot-dip galvanised, 100 mm depth) is used for heavy-duty cable support in plant rooms, basement carparks, main risers, and trunk distribution routes in Malaysian commercial and industrial buildings. Open-rung design promotes air circulation and enables easy cable additions. Side rail thickness 2.0-3.0 mm; rung spacing 300 mm centres. Widths 300-900 mm; 3 m lengths. Conforms to IEC 61537 / BS EN 50085. HDG per MS EN ISO 1461. Also known as tangga kabel or ladder tray. HS 7308909900 · duty 15% · SST 0%.

Heavy-gauge uPVC electrical conduit (20 mm) is a rigid thermoplastic pipe that protects insulated wiring in building electrical installations — surface-mounted or embedded in concrete and screed. Conforms to BS EN 61386; SIRIM-certified products are required under the Malaysian Electricity Supply Act 1990 wiring regulations. Available in 20, 25, 32, 38, and 50 mm diameters; 3 m lengths. Joined by solvent cement or push-fit couplings. Used in residential, commercial, and light industrial wiring. Also known as konduit PVC or PVC conduit pipe. HS 3917230000 · duty 20% · SST 5%.

GI (galvanised iron) electrical conduit 20 mm is an ERW mild steel pipe, hot-dip or electro-galvanised, used to protect wiring in industrial, commercial, and outdoor applications where mechanical protection or flame resistance is required. Threaded ends (BSP) for screwed coupling joints. Heavy gauge used in plant rooms, exposed runs, and high-impact zones. Conforms to BS 31 / BS EN 61386-23. SIRIM certification required under Malaysian electrical regulations. Diameters 20-63 mm; lengths 3.8 m or 4 m. Also known as konduit GI or steel conduit. HS 7306301900 · duty 15% · SST 0%.

Fire-rated LSOH cable 2-core 2.5 mm² (FP200 type) is a low-smoke zero-halogen cable that maintains circuit integrity at elevated temperatures for fire alarm, emergency lighting, and critical safety circuits in Malaysian buildings. Maintains circuit integrity at 650°C for 30 min (or 950°C/60 min for enhanced grade) per BS 7629 / IEC 60331. LSOH sheath minimises toxic smoke and corrosive gas in a fire event. Mandatory for fire protection systems under the Malaysian Uniform Building By-Laws (UBBL). Also known as kabel tahan api or fire resistant cable. HS 8544492200 · duty 30% · SST 10%.

Polyethylene commercial water storage tank 5,000 L is a food-grade PE, UV-stabilised ground-level cold water cistern for commercial buildings, hospitals, schools, and high-rise residential towers in Malaysia. Used as break-pressure tanks (BPT) at building services transfer levels or as ground-level sumps feeding booster pump sets. SIRIM-certified. Fitted with 50-63 mm BS-flanged inlets/outlets, vent, drain, and manhole cover. Capacities from 2,000 to 20,000 L; rotationally moulded for large units. HS 3925100000 · duty 20% · SST 0%.

Pressurisation booster pump set (commercial, twin-pump) is a packaged system for cold-water or hot-water service distribution in Malaysian commercial buildings, hospitals, and high-rise towers. Typically configured as twin-pump duty/standby to distribute water from ground-level storage to upper floors. Includes 2 centrifugal pump heads, manifold, pressure vessel, control panel, and base frame. Rated flow 1-50 m³/h, head 20-80 m; 3-phase 415 V, 50 Hz. VSD (variable-speed drive) models for energy efficiency. Designed to MS / BS 8558 cold-water system standards. HS 8413703100 · duty 20% · SST 5%.

Vitreous china back-to-wall WC suite (commercial / hotel grade) is a concealed-cistern toilet system for hotels, office buildings, and commercial washrooms in Malaysia. The WC pan (back-to-wall or wall-hung) is paired with an in-wall cistern frame (such as Geberit Duofix) for a flush-wall aesthetic. Dual-flush 3 L / 6 L meets SPAN water-efficiency requirements. Vitreous china body per commercial-grade fixings. MEP-specified in commercial projects; distinctly different from residential close-coupled suites. HS 6910100000 · duty 25% · SST 10%.

Motorised butterfly valve DN50-DN200 is an electrically actuated wafer or lug-type valve for flow control and isolation in Malaysian commercial building mechanical services — HVAC chilled water and heating systems, building water supply risers, and AHU coil connections. On/off or modulating control (4-20 mA) via BMS signal. Body sizes DN50-DN200; ductile iron or stainless-steel disc; EPDM or NBR seat; electric actuator 24 V or 230 V. Brands include Honeywell, Belimo, and Johnson Controls. HS 8481807300 · duty 20% · SST 10%.

Flanged gate valve DN50-DN200 (PN 16) is a full-bore isolating valve for Malaysian commercial building services pipework — mechanical plant rooms, main water service risers, fire-fighting ring mains, and HVAC distribution. Ductile iron body with resilient-seated wedge disc to BS 5163 / BS EN 1171. PN 16 flanged ends to BS EN 1092-2. WRAS approval required for potable-water service. Sizes DN50 to DN250. Also known as sluice valve, injap pintu, or isolation valve flanged. HS 8481201100 · duty 20% · SST 10%.