Name: Brass Gate Valve (PN 16, Residential)
Brand: ttkbuildingmaterials.com Product Index
Availability: InStock

WHAT IT IS

A brass gate valve is a PN 16-rated shut-off valve used for isolating water supply branches in Malaysian residential and light commercial plumbing. The full-bore rising or non-rising spindle design provides a positive open/close indication and low pressure drop when fully open. Available in screwed BSP ends (BS 21) from DN15 (½") to DN100 (4"), gate valves are fitted at water meter flanks, service entries, and branch connections for complete isolation. Also known as injap pintu or stop valve. HS 8481202000 · import duty 25% · SST 10%.

UNIT OF MEASURE

PIECE (PRIMARY)

Typical pack size: Sold per piece; sizes ½" – 4" (DN15 – DN100)

GRADE & SPECIFICATION

Brass body, PN 16 (16 bar). Screwed BSP (BS 21) or flanged end. For cold-water service up to 80°C.

CLASSIFICATION

UNSPSC 40141613

CIDB CATEGORY Plumbing Fixtures & Fittings — Valves

UNSPSC codes are issued by the United Nations Global Marketplace (UNGM). CIDB categories are defined by Malaysia's Construction Industry Development Board. These codes are informational — use them to verify, not replace, procurement classification.

TARIFF & TAX — PDK 2025

HS CODE (AHTN) 8481202000

OFFICIAL DESCRIPTION Of copper or copper alloys, with an internal diameter of 2.5 cm or less, or of plastics, with an internal diameter of not less than 1 cm and not more than 2.5 cm

IMPORT DUTY (MFN) 25%

SST 10%

Sourced from PDK 2025 (Customs Duties Order 2025). The import duty shown is the MFN / general rate — preferential rates under FTAs (ATIGA, ACFTA, etc.) are typically lower or zero. SST per the PDK 2025 schedule (a value like 10%/0% means standard/exempt variants). Indicative only — confirm the applicable rate and tax treatment with your licensed customs/tax agent before relying on it. Spotted an error? hello@ttkbuildingmaterials.com