Name: Perforated Steel Cable Tray (Hot-Dip Galvanised, 50 mm Depth)
Brand: ttkbuildingmaterials.com Product Index
Availability: InStock

WHAT IT IS

Perforated steel cable tray (hot-dip galvanised, 50 mm depth) is used to support and route electrical and data cables in commercial and industrial buildings across Malaysia. Hot-dip galvanised (HDG) per MS EN ISO 1461; steel thickness 1.2-1.5 mm (heavy-duty 2.0 mm). Conforms to BS EN 50085 / IEC 61537. Widths 100-600 mm; 3 m lengths. Installed on threaded rod hangers or wall brackets; accessories include bends, tees, reducers, risers, and covers. Also known as dulang kabel or GI cable tray. HS 7308906000 · duty 10% · SST 5%.

UNIT OF MEASURE

LENGTH (PRIMARY) M

Typical pack size: 3 m/length; widths: 100 mm, 150 mm, 200 mm, 300 mm, 450 mm, 600 mm; depth 50 mm or 100 mm

GRADE & SPECIFICATION

Hot-dip galvanised (HDG) mild steel per MS EN ISO 1461. Thickness 1.2 mm or 1.5 mm. Heavy-duty options 2.0 mm. Conforms to BS EN 50085 / IEC 61537.

CLASSIFICATION

UNSPSC 39131704

CIDB CATEGORY Electrical / MEP — Cable containment (cable trays and ladder)

UNSPSC codes are issued by the United Nations Global Marketplace (UNGM). CIDB categories are defined by Malaysia's Construction Industry Development Board. These codes are informational — use them to verify, not replace, procurement classification.

TARIFF & TAX — PDK 2025

HS CODE (AHTN) 7308906000

OFFICIAL DESCRIPTION Perforated cable trays

IMPORT DUTY (MFN) 10%

SST 5%

Sourced from PDK 2025 (Customs Duties Order 2025). The import duty shown is the MFN / general rate — preferential rates under FTAs (ATIGA, ACFTA, etc.) are typically lower or zero. SST per the PDK 2025 schedule (a value like 10%/0% means standard/exempt variants). Indicative only — confirm the applicable rate and tax treatment with your licensed customs/tax agent before relying on it. Spotted an error? hello@ttkbuildingmaterials.com