EN | MS

PRODUCT INDEX / GREEN & ENERGY MATERIALS

Expanded Polystyrene (EPS) Thermal Insulation Board

INSULATION

EPS insulation board polystyrene insulation expanded polystyrene board styrofoam insulation foam insulation board EPS board papan EPS papan polistirena polistirena dikembang 泡沫隔热板 EPS隔热板 发泡聚苯乙烯 roof EPS board white foam board
Expanded Polystyrene (EPS) Thermal Insulation Board
Request Quote Enterprise Tender Service

WHAT IT IS

Expanded polystyrene (EPS) boards are lightweight closed-cell thermal insulation panels with thermal conductivity of approximately 0.031-0.038 W/m K. Used in Malaysia for roof insulation under metal deck or above concrete slab, external wall insulation systems (EIFS/ETICS), and cold-room construction. Product performance referenced against MS EN 13163 or ASTM C578. Density 10-30 kg/m3. Energy-efficiency framing per MS 2680:2017 and MS 1525:2019. Must be protected by appropriate facing as inherently combustible. Standard sheets 2440 mm x 1220 mm; thickness 25-150 mm. Sold per m2. Also called EPS board, papan EPS, or papan polistirena.

UNIT OF MEASURE

M² (PRIMARY) SHEET PIECE

Typical pack size: Standard sheet 2440 × 1220 mm or 1000 × 500 mm; thickness 25–150 mm

GRADE & SPECIFICATION

Expanded polystyrene per MS EN 13163 (factory-made EPS products — specification) or ASTM C578. Thermal conductivity λ ≈ 0.031–0.038 W/m·K. Density 10–30 kg/m³ typical. Fire performance: inherently combustible — must be protected by appropriate facing. Energy-efficiency framing per MS 2680:2017 and MS 1525:2019.

CLASSIFICATION

UNSPSC 30141514
UNSPSC codes are issued by the United Nations Global Marketplace (UNGM). CIDB categories are defined by Malaysia's Construction Industry Development Board. These codes are informational — use them to verify, not replace, procurement classification.

TAX — INDICATIVE ONLY

Plastic-based insulation boards are indicatively taxable under Malaysian SST. Confirm applicable rate with your licensed tax agent; tax positions change.

Suggested SST treatment — indicative only. Confirm with your licensed tax agent. Tax positions change and this is not a tax ruling. ttkbuildingmaterials.com accepts no liability for tax decisions made in reliance on this information. Spotted anything wrong in this listing (spec, classification code, or tax)? Email hello@ttkbuildingmaterials.com and we will review it.

HS CODE — INDICATIVE ONLY

3921.11 (cellular plastics — expanded polystyrene — plates, sheets, film, foil or strip)

Indicative HS code for import classification. Verify with your customs agent or Customs Malaysia (Jabatan Kastam) before use.

QUICK REFERENCE

PRIMARY UOM

TYPICAL PACK SIZE

Standard sheet 2440 × 1220 mm or 1000 × 500 mm; thickness 25–150 mm

UNSPSC

30141514

GET QUOTES

Request Quote Tender Service

SUPPLIERS WHO CARRY THIS

GREEN & ENERGY MATERIALS SUPPLIERS →
Aathaworld

Selangor

Request Quote
HI-BEAM

Selangor

Request Quote
SUMMER

Selangor

Request Quote
Dexsteel (M) Sdn Bhd

Selangor

Request Quote
Power Strength Specialist (PG) Sdn Bhd

Penang

Request Quote
Global Electrical Hardware Trading Sdn. Bhd.

Kuala Lumpur

Request Quote

MALAYSIAN MANUFACTURERS IN THIS CATEGORY

Factories in Malaysia that make Green & Energy Materials products.

Accfree Malaysia · Selangor Colourcoil Industries · Sabah Crystal Safety Glass (CSG) · Selangor LigLED / Ligetech Automation · Melaka Olympic Cable Company Sdn Bhd · Melaka Oversea Lighting & Electric · Selangor PMB Aluminium · Selangor Superb Aluminium · Selangor Tonn Cable Sdn Bhd · Selangor Winstar Aluminium · Selangor

See all Malaysian building-materials manufacturers →

COMMONLY USED TOGETHER

Materials typically specified alongside Expanded Polystyrene (EPS) Thermal Insulation Board on the same job.

COMPARE SIMILAR PRODUCTS

Reflective Foil Insulation (Roofing / Underlay) → Rockwool / Mineral Wool Thermal Insulation Board → Polyethylene (PE) Foam Sheet Insulation → Elastomeric Waterproof Thermal Insulation Coating →

Send a Quote Request

By submitting, you agree to our Privacy Notice .