Name: Reflective Foil Insulation (Roofing / Underlay)
Brand: ttkbuildingmaterials.com Product Index
Availability: InStock

WHAT IT IS

Reflective foil insulation consists of aluminium foil facings bonded to a polyethylene bubble or foam core, installed under roof tiles or metal sheets as a radiant barrier. It reflects up to 95% of radiant heat (emissivity 0.05 or lower), reducing cooling loads in Malaysia's tropical climate. Performance referenced under MS 2095 (radiation-proof insulation sheets), MS 2680:2017, and MS 1525:2019. Roll size typically 30-50 m x 1.2 m; thickness 3-10 mm (single or double bubble). Must be installed with an air gap on the reflective surface to be effective. Sold per roll or m2. Also called penebatan foil bumbung or radiant barrier.

UNIT OF MEASURE

ROLL (PRIMARY) M²

Typical pack size: Roll typically 30–50 m × 1.2 m; thickness 3–10 mm (single or double bubble)

GRADE & SPECIFICATION

Reflectivity typically ≥95%; emissivity ≤0.05 for aluminium facing. Performance referenced under MS 2680:2017 and MS 1525:2019 for thermal envelope compliance. Malaysian Standard MS 2095 covers radiation-proof insulation sheets. Tested per ASTM C1313 or equivalent.

CLASSIFICATION

UNSPSC 30141508

CIDB CATEGORY Insulation Materials — radiation-proof insulation sheets regulated under MS 2095 within CIDB Schedule 4 insulation category

UNSPSC codes are issued by the United Nations Global Marketplace (UNGM). CIDB categories are defined by Malaysia's Construction Industry Development Board. These codes are informational — use them to verify, not replace, procurement classification.

TAX — INDICATIVE ONLY

Insulation products are indicatively taxable under Malaysian SST. Confirm applicable rate with your licensed tax agent; tax positions change.

Suggested SST treatment — indicative only. Confirm with your licensed tax agent. Tax positions change and this is not a tax ruling. ttkbuildingmaterials.com accepts no liability for tax decisions made in reliance on this information. Spotted anything wrong in this listing (spec, classification code, or tax)? Email hello@ttkbuildingmaterials.com and we will review it.