Name: Heavy-Duty Shoring Tower (Prop Shoring Frame)
Brand: ttkbuildingmaterials.com Product Index
Availability: InStock

WHAT IT IS

Heavy-duty shoring tower (prop shoring frame) is a stacked steel frame system used where individual adjustable props are insufficient: under transfer plates, thick flat-slab pours, bridge decks, and multi-storey propping in Malaysian high-rise construction. Steel frames are stacked tier by tier and cross-braced to form a freestanding tower transferring loads to the ground or a lower structural slab. Safe working loads typically 200 to 500 kN per tower leg. Frame bays 0.6 m × 0.6 m to 1.5 m × 1.5 m; adjustable in height with screw-jack U-heads and base plates. HS 7308409000 · import duty 15% · SST 5%.

UNIT OF MEASURE

SET (PRIMARY) UNIT M

Typical pack size: Frame bays 0.6 m × 0.6 m to 1.5 m × 1.5 m; heights typically 1.5–4.5 m adjustable per tier; stacked to project height; supplied as frame + cross brace + U-head + base plate set

GRADE & SPECIFICATION

High-strength steel tube or pressed steel frame. Standards: BS 5975:2019 (falsework) and CIS 23. Safe working load (SWL) typically 200 to 500 kN per tower leg depending on frame type and extension.

CLASSIFICATION

UNSPSC 30191801

CIDB CATEGORY Formwork/Falsework: Shoring Tower (CIS 23; BS 5975:2019)

UNSPSC codes are issued by the United Nations Global Marketplace (UNGM). CIDB categories are defined by Malaysia's Construction Industry Development Board. These codes are informational — use them to verify, not replace, procurement classification.

TARIFF & TAX — PDK 2025

HS CODE (AHTN) 7308409000

OFFICIAL DESCRIPTION Other

IMPORT DUTY (MFN) 15%

SST 5%

Sourced from PDK 2025 (Customs Duties Order 2025). The import duty shown is the MFN / general rate — preferential rates under FTAs (ATIGA, ACFTA, etc.) are typically lower or zero. SST per the PDK 2025 schedule (a value like 10%/0% means standard/exempt variants). Indicative only — confirm the applicable rate and tax treatment with your licensed customs/tax agent before relying on it. Spotted an error? hello@ttkbuildingmaterials.com

QUICK REFERENCE

PRIMARY UOM

set

TYPICAL PACK SIZE

Frame bays 0.6 m × 0.6 m to 1.5 m × 1.5 m; heights typically 1.5–4.5 m adjustable per tier; stacked to project height; supplied as frame + cross brace + U-head + base plate set