EN | MS

PRODUCT INDEX / DOORS, WINDOWS & GLASS

Tempered (Toughened) Safety Glass 10 mm

GLASS

tempered glass toughened glass safety glass kaca temper kaca keras 钢化玻璃 toughened safety glass kaca keselamatan temper 10mm tempered
Tempered (Toughened) Safety Glass 10 mm
Request Quote Enterprise Tender Service

WHAT IT IS

Tempered (toughened) safety glass is thermally processed to surface compressive stress of 90 N/mm2 or higher, making it 4-5 times stronger than annealed glass. When broken it shatters into small granular fragments, reducing laceration risk. Meets MS 1872 / BS EN 12150-1. Malaysian building code requires tempered glass for shower screens, glass doors, low-level glazing, and balustrades. 10 mm is the most common shopfront and frameless glass door thickness. Custom fabricated to order -- cannot be cut or drilled after tempering. Sold per m2. Also called kaca temper or kaca keras. HS 7007.199000, import duty 30%, SST 10%.

UNIT OF MEASURE

M² (PRIMARY) SQFT PIECE

Typical pack size: Custom fabricated to order; standard stock sizes 1830 mm × 2440 mm; tempered after cutting — cannot be reworked on site

GRADE & SPECIFICATION

Heat-strengthened safety glass to MS 1872 (Safety glass for buildings) / BS EN 12150-1. Compressive surface stress ≥90 N/mm². Impact resistance ≥5× that of annealed glass. Fragments safely into small granular pieces. Must be edge-worked and hole-drilled before tempering.

CLASSIFICATION

UNSPSC 30171706
CIDB CATEGORY Glass and Glazing Materials (Safety Glass)
UNSPSC codes are issued by the United Nations Global Marketplace (UNGM). CIDB categories are defined by Malaysia's Construction Industry Development Board. These codes are informational — use them to verify, not replace, procurement classification.

TARIFF & TAX — PDK 2025

HS CODE (AHTN) 7007199000
OFFICIAL DESCRIPTION Other
IMPORT DUTY (MFN) 30%
SST 10%
Sourced from PDK 2025 (Customs Duties Order 2025). The import duty shown is the MFN / general rate — preferential rates under FTAs (ATIGA, ACFTA, etc.) are typically lower or zero. SST per the PDK 2025 schedule (a value like 10%/0% means standard/exempt variants). Indicative only — confirm the applicable rate and tax treatment with your licensed customs/tax agent before relying on it. Spotted an error? hello@ttkbuildingmaterials.com

QUICK REFERENCE

PRIMARY UOM

TYPICAL PACK SIZE

Custom fabricated to order; standard stock sizes 1830 mm × 2440 mm; tempered after cutting — cannot be reworked on site

UNSPSC

30171706

GET QUOTES

Request Quote Tender Service

SUPPLIERS WHO CARRY THIS

DOORS, WINDOWS & GLASS SUPPLIERS →
Chin Hin Group

Selangor

Request Quote
Press Metal Aluminium

Selangor

Request Quote
Ajiya Berhad

Selangor

Request Quote
MIDAHDOR

Selangor

Request Quote
EPIC Diversity Sdn Bhd

Selangor

Request Quote
SAM'S

Selangor

Request Quote

MALAYSIAN MANUFACTURERS IN THIS CATEGORY

Factories in Malaysia that make Doors, Windows & Glass products.

AGT Safety Glass · Selangor Alumac · Selangor Alumaster (Classic Emas) · Sarawak AW Formwork Products · Selangor Bailey Plaster · Selangor CBL Malaysia · Pulau Pinang Claytan · Johor Claytan Ceramics · Johor Crystal Safety Glass (CSG) · Selangor EL Mega Aluminium · Melaka

See all Malaysian building-materials manufacturers →

COMMONLY USED TOGETHER

Materials typically specified alongside Tempered (Toughened) Safety Glass 10 mm on the same job.

COMPARE SIMILAR PRODUCTS

Clear Float Glass 4 mm → Clear Float Glass 6 mm → Laminated Safety Glass 6.38 mm (6+0.38+6) → Tinted Float Glass 6 mm (Solar Control) →

Send a Quote Request

By submitting, you agree to our Privacy Notice .