Name: Exterior-Applied Solar Control Window Film
Brand: ttkbuildingmaterials.com Product Index
Availability: InStock

WHAT IT IS

Exterior-applied solar control window film is designed for installation on the outside face of glass — essential where interior access is restricted, such as sealed double-glazing units, structural glass curtain walls, and atrium skylights in Malaysia. The UV-stabilised, weather-resistant polyester substrate and scratch-resistant hard coat withstand Malaysia's high UV index and tropical humidity. VLT range 14–50%; TSER up to 74%; UV rejection ≥99%. Rejects solar heat before it enters the glass pane. Typical service life 5–10 years (shorter than interior film due to greater UV and moisture exposure). Brands include LLumar Exterior and 3M Prestige Exterior. Installed per sqft. HS 3919909200 · import duty 20% · SST 10%.

UNIT OF MEASURE

SQFT (PRIMARY) M² ROLL

Typical pack size: Rolls: 60 in × 100 ft; installed per sqft; weathering grades required for external exposure

GRADE & SPECIFICATION

UV-stabilised and weather-resistant polyester substrate rated for external application; VLT range 14–50%; TSER up to 74%; UV rejection ≥99%; scratch-resistant hard coat essential for exterior use; rated for Malaysia's tropical climate (high humidity, UV index). LLumar Exterior series, 3M Prestige Exterior series.

CLASSIFICATION

UNSPSC 30171600

UNSPSC codes are issued by the United Nations Global Marketplace (UNGM). CIDB categories are defined by Malaysia's Construction Industry Development Board. These codes are informational — use them to verify, not replace, procurement classification.

TARIFF & TAX — PDK 2025

HS CODE (AHTN) 3919909200 (MEDIUM CONFIDENCE)

OFFICIAL DESCRIPTION Of addition polymerisation products; of condensation or rearrangement polymerisation products; of cellulose nitrate, cellulose acetates and other chemical derivatives of cellulose, plasticised

IMPORT DUTY (MFN) 20%

SST 10%

Sourced from PDK 2025 (Customs Duties Order 2025). The import duty shown is the MFN / general rate — preferential rates under FTAs (ATIGA, ACFTA, etc.) are typically lower or zero. SST per the PDK 2025 schedule (a value like 10%/0% means standard/exempt variants). Indicative only — confirm the applicable rate and tax treatment with your licensed customs/tax agent before relying on it. Spotted an error? hello@ttkbuildingmaterials.com