EN | MS

PRODUCT INDEX / TIMBER & BOARDS

Film-Faced (Phenolic) Formwork Plywood 18 mm

FORMWORK BOARD

film-faced plywood phenolic plywood formwork plywood shuttering board HDO plywood concrete form plywood papan acuan berfilem papan bekisting 覆膜胶合板 酚醛模板 建筑模板 清水模板
Film-Faced (Phenolic) Formwork Plywood 18 mm
Request Quote Enterprise Tender Service

WHAT IT IS

Film-faced formwork plywood (18 mm) is a WBP hardwood plywood panel with smooth phenolic resin film laminated to both faces, for concrete formwork and shuttering on Malaysian construction sites. The HDO film (≥120 g/m²) provides a waterproof release surface rated for 6–15+ re-uses per panel. Standard sheet 2440 × 1220 mm (8 × 4), 11-ply at 18 mm — the dominant Malaysian site standard for slab, beam, and wall formwork. Also available at 12 mm, 15 mm, and 21 mm. Locally known as papan acuan berfilem or papan bekisting. HS 4412310000 · import duty 35% · SST 5%.

UNIT OF MEASURE

SHEET (PRIMARY)

Typical pack size: 2440 × 1220 mm (8′ × 4′); standard thickness 18 mm (also available 12 mm, 15 mm, 21 mm)

GRADE & SPECIFICATION

Phenolic film (HDO — High Density Overlay, ≥120 g/m²) bonded both faces. WBP phenolic resin bond between veneers. Typically 11-ply at 18 mm. Film provides waterproof, smooth off-form concrete finish; rated for 6–15+ re-uses depending on handling. No specific Malaysian Standard — manufactured to buyer specification; common reference is Doka/PERI system board requirements.

CLASSIFICATION

UNSPSC 11122001
UNSPSC codes are issued by the United Nations Global Marketplace (UNGM). CIDB categories are defined by Malaysia's Construction Industry Development Board. These codes are informational — use them to verify, not replace, procurement classification.

TARIFF & TAX — PDK 2025

HS CODE (AHTN) 4412310000
OFFICIAL DESCRIPTION With at least one outer ply of tropical wood
IMPORT DUTY (MFN) 35%
SST 5%
Sourced from PDK 2025 (Customs Duties Order 2025). The import duty shown is the MFN / general rate — preferential rates under FTAs (ATIGA, ACFTA, etc.) are typically lower or zero. SST per the PDK 2025 schedule (a value like 10%/0% means standard/exempt variants). Indicative only — confirm the applicable rate and tax treatment with your licensed customs/tax agent before relying on it. Spotted an error? hello@ttkbuildingmaterials.com

QUICK REFERENCE

PRIMARY UOM

sheet

TYPICAL PACK SIZE

2440 × 1220 mm (8′ × 4′); standard thickness 18 mm (also available 12 mm, 15 mm, 21 mm)

CATEGORY

Timber & Boards

UNSPSC

11122001

GET QUOTES

Request Quote Tender Service

SUPPLIERS WHO CARRY THIS

TIMBER & BOARDS SUPPLIERS →
Buildmate Hardware

Selangor

Request Quote
CL Hardware

Selangor

Request Quote
Saint-Gobain Malaysia

Selangor

Request Quote
ME FLOOR

Selangor

Request Quote
Akira Roofing Sdn Bhd

Johor

Request Quote
Heng Sheng Hardware Sdn Bhd

Selangor

Request Quote

MALAYSIAN MANUFACTURERS IN THIS CATEGORY

Factories in Malaysia that make Timber & Boards products.

AGT Safety Glass · Selangor Anchor-Link · Selangor Astino Berhad · Penang Bailey Plaster · Selangor CBL Malaysia · Pulau Pinang Claybricks & Tiles · Johor Crystal Safety Glass (CSG) · Selangor Daiken Sarawak Sdn Bhd · Sarawak Dongwha Malaysia Sdn Bhd · Negeri Sembilan Elecol Switchgear · Selangor

See all Malaysian building-materials manufacturers →

COMMONLY USED TOGETHER

Materials typically specified alongside Film-Faced (Phenolic) Formwork Plywood 18 mm on the same job.

COMPARE SIMILAR PRODUCTS

Marine Plywood (BS 1088) → Commercial / General Plywood MR Grade (BB/CC) → WBP Structural / Exterior Plywood (BB/CC, EN 636) → Medium Density Fibreboard (MDF) Standard E1 →

Send a Quote Request

By submitting, you agree to our Privacy Notice .