Name: Ready-Mixed Concrete Grade G40 (40 N/mm²)
Brand: ttkbuildingmaterials.com Product Index
Availability: InStock

WHAT IT IS

Ready-Mixed Concrete Grade G40 is a plant-batched high-strength concrete with 40 N/mm² characteristic compressive strength used for demanding structural elements in Malaysian high-rise and heavy construction. Conforming to MS EN 206:2018, G40 is specified for transfer plates, pile caps, heavily loaded columns, and post-tensioned deck slabs where reduced section sizes or high load transfer are required. Delivered by transit mixer; minimum order typically 3–5 m³. A lower water-cement ratio and closer quality control are required compared with standard grades. CIDB/SIRIM conformity required. Also known as high-strength concrete, konkrit berkekuatan tinggi, RMC G40, and grade 40 concrete.

UNIT OF MEASURE

M³ (PRIMARY)

Typical pack size: Delivered by transit mixer; minimum order typically 3–5 m³

GRADE & SPECIFICATION

Characteristic compressive strength 40 N/mm² at 28 days to MS EN 206:2018. High-strength grade for transfer plates, pile caps, high-rise columns, and post-tensioned slabs.

CLASSIFICATION

UNSPSC 30111505

CIDB CATEGORY Ready-Mixed Concrete (CIDB/SIRIM regulated under MS EN 206)

UNSPSC codes are issued by the United Nations Global Marketplace (UNGM). CIDB categories are defined by Malaysia's Construction Industry Development Board. These codes are informational — use them to verify, not replace, procurement classification.

TAX — INDICATIVE ONLY

Indicatively SST-exempt on the material component. Suggested treatment: confirm with your licensed tax agent; tax positions change.

Suggested SST treatment — indicative only. Confirm with your licensed tax agent. Tax positions change and this is not a tax ruling. ttkbuildingmaterials.com accepts no liability for tax decisions made in reliance on this information. Spotted anything wrong in this listing (spec, classification code, or tax)? Email hello@ttkbuildingmaterials.com and we will review it.