Name: High-Yield Deformed Steel Reinforcing Bar (Y-Bar) Y10–Y32
Brand: ttkbuildingmaterials.com Product Index
Availability: InStock

WHAT IT IS

High-Yield Deformed Steel Reinforcing Bar (Y-Bar) is the primary structural reinforcement used in reinforced concrete construction across Malaysia. Grade B500B to MS 146:2014 (equivalent to BS 4449:2005), Y-bars have a ribbed surface that provides mechanical bond with concrete, achieving a characteristic yield strength of 500 MPa. Available in diameters Y10, Y12, Y16, Y20, Y25, and Y32 for main structural reinforcement; Y6 and Y8 are used for links and stirrups. Standard length 12 m; bundled in 2–3 tonne lifts. UOM: tonne. Bar marking is mandatory for bars ≥10 mm under CIDB enforcement. HS 7214203100 · import duty 5% · SST 0%. Also known as besi Y, besi berigi, Grade 500 rebar, HY bar, and deformed bar in the local trade.

UNIT OF MEASURE

TONNE (PRIMARY) KG LENGTH

Typical pack size: Standard length 12 m/bar; bundled in 2–3 tonne lifts. Coil available for Y10 and smaller.

GRADE & SPECIFICATION

Grade B500B to MS 146:2014 / BS 4449:2005 (identical). Characteristic yield strength 500 MPa. Available diameters: Y10, Y12, Y16, Y20, Y25, Y32 (and Y6, Y8 for links). Bar marking required per CIDB enforcement for ≥10 mm bars.

CLASSIFICATION

UNSPSC 30102404

CIDB CATEGORY Steel reinforcement bar — CIDB mandatory bar-marking enforcement for bars ≥10 mm; MS 146:2014 compliance required

UNSPSC codes are issued by the United Nations Global Marketplace (UNGM). CIDB categories are defined by Malaysia's Construction Industry Development Board. These codes are informational — use them to verify, not replace, procurement classification.

TARIFF & TAX — PDK 2025

HS CODE (AHTN) 7214203100

OFFICIAL DESCRIPTION Of a kind used for concrete reinforcement (rebars)

IMPORT DUTY (MFN) 5%

SST 0%

Sourced from PDK 2025 (Customs Duties Order 2025). The import duty shown is the MFN / general rate — preferential rates under FTAs (ATIGA, ACFTA, etc.) are typically lower or zero. SST per the PDK 2025 schedule (a value like 10%/0% means standard/exempt variants). Indicative only — confirm the applicable rate and tax treatment with your licensed customs/tax agent before relying on it. Spotted an error? hello@ttkbuildingmaterials.com