Name: BRC Welded Wire Mesh (Reinforcing Fabric) A6–A10
Brand: ttkbuildingmaterials.com Product Index
Availability: InStock

WHAT IT IS

BRC Welded Wire Mesh (Reinforcing Fabric) is a prefabricated grid of cold-drawn steel wires welded at all intersections, used for slab and wall reinforcement in Malaysian construction. Conforming to MS 145:2007 (equivalent to BS 4483:1998), standard sheets measure 2.2 m × 6.0 m in grades A6 (5.5–6.0 mm wire), A7 (6.5–7.0 mm), A8 (8.0 mm), and A10 (10.0 mm). SIRIM certification is required for JKR and government projects. Supplied per sheet; UOM: sheet (also m², tonne). HS 7314200000 · import duty 5% · SST 0%/10%. A6/A7 suits residential slabs; A8/A10 is specified for heavy industrial floors and retaining walls. Also known as jaring BRC, welded wire fabric, reinforcing mesh, and jaring dawai.

UNIT OF MEASURE

SHEET (PRIMARY) M² TONNE

Typical pack size: Standard sheet 2.2 m × 6.0 m; stacked in bundles of 10–20 sheets

GRADE & SPECIFICATION

Welded steel fabric to MS 145:2007 (equivalent to BS 4483:1998). Wire diameters: A6 (6.0 mm JKR / 5.5 mm common), A7 (7.0 mm JKR / 6.5 mm common), A8 (8.0 mm), A10 (10.0 mm). SIRIM certification required for JKR/government projects.

CLASSIFICATION

UNSPSC 30111903

CIDB CATEGORY Wire mesh / reinforcing fabric — MS 145:2007; SIRIM certification for JKR full spec

UNSPSC codes are issued by the United Nations Global Marketplace (UNGM). CIDB categories are defined by Malaysia's Construction Industry Development Board. These codes are informational — use them to verify, not replace, procurement classification.

TARIFF & TAX — PDK 2025

HS CODE (AHTN) 7314200000

OFFICIAL DESCRIPTION Grill, netting and fencing, welded at the intersection, of wire with a maximum cross-sectional dimension of 3 mm or more and having a mesh size of 100 cm2 or more

IMPORT DUTY (MFN) 5%

SST 0%/10%

Sourced from PDK 2025 (Customs Duties Order 2025). The import duty shown is the MFN / general rate — preferential rates under FTAs (ATIGA, ACFTA, etc.) are typically lower or zero. SST per the PDK 2025 schedule (a value like 10%/0% means standard/exempt variants). Indicative only — confirm the applicable rate and tax treatment with your licensed customs/tax agent before relying on it. Spotted an error? hello@ttkbuildingmaterials.com