EN | MS

PRODUCT INDEX / STRUCTURAL MATERIALS

Ready-Mixed Concrete Grade G20 (20 N/mm²)

READY MIXED CONCRETE

G20 grade 20 concrete 20 MPa concrete RMC G20 ready mix G20 konkrit G20 混凝土 G20 ready-mix concrete G20
Ready-Mixed Concrete Grade G20 (20 N/mm²)
Request Quote Enterprise Tender Service

WHAT IT IS

Ready-Mixed Concrete Grade G20 is a plant-batched structural concrete with 20 N/mm² characteristic compressive strength used for non-structural and lightly loaded applications in Malaysian construction. Conforming to MS EN 206:2018, G20 is the standard grade for blinding concrete, oversite slabs, kerbing, and low-stress floor layers on residential and commercial sites. Delivered by transit mixer; minimum order typically 3–5 m³. CIDB/SIRIM conformity required under the MS EN 206 and CIDB CIS programme. Because hs_code is not applicable for locally batched ready-mixed concrete, no HS/duty data applies. Also known as konkrit G20, RMC G20, and grade 20 concrete in the Malaysian trade.

UNIT OF MEASURE

M³ (PRIMARY)

Typical pack size: Minimum order typically 3–5 m³; delivered by transit mixer

GRADE & SPECIFICATION

Characteristic compressive strength 20 N/mm² at 28 days to MS EN 206:2018. Suitable for non-structural fills, blinding concrete, and light floor slabs.

CLASSIFICATION

UNSPSC 30111505
CIDB CATEGORY Ready-Mixed Concrete (regulated product — CIDB/SIRIM conformity required under MS EN 206 and CIDB CIS programme)
UNSPSC codes are issued by the United Nations Global Marketplace (UNGM). CIDB categories are defined by Malaysia's Construction Industry Development Board. These codes are informational — use them to verify, not replace, procurement classification.

TAX — INDICATIVE ONLY

Ready-mixed concrete is generally treated as a construction service/supply — indicatively SST-exempt on the material component. Suggested treatment: confirm with your licensed tax agent; tax positions change.

Suggested SST treatment — indicative only. Confirm with your licensed tax agent. Tax positions change and this is not a tax ruling. ttkbuildingmaterials.com accepts no liability for tax decisions made in reliance on this information. Spotted anything wrong in this listing (spec, classification code, or tax)? Email hello@ttkbuildingmaterials.com and we will review it.

QUICK REFERENCE

PRIMARY UOM

TYPICAL PACK SIZE

Minimum order typically 3–5 m³; delivered by transit mixer

UNSPSC

30111505

GET QUOTES

Request Quote Tender Service

SUPPLIERS WHO CARRY THIS

STRUCTURAL MATERIALS SUPPLIERS →
BuildPro Malaysia

Selangor

Request Quote
Buildmate Hardware

Selangor

Request Quote
Ewarehouse

Kuala Lumpur

Request Quote
MyBuildingMaterial

Selangor

Request Quote
Building Materials Online

Selangor

Request Quote
Builtory

Kuala Lumpur

Request Quote

MALAYSIAN MANUFACTURERS IN THIS CATEGORY

Factories in Malaysia that make Structural Materials products.

Alliance Steel · Pahang Alpine Pipe Manufacturing · Selangor Amcan Color Coating Industries · Sarawak Amsteel Mills · Selangor Anchor-Link · Selangor Ann Joo Resources Berhad · Pulau Pinang Antara Steel Mills · Johor Array Metal · Selangor Asia Roofing Industries (Ajiya) · Johor Asia Wire Steel Mesh · Selangor

See all Malaysian building-materials manufacturers →

COMMONLY USED TOGETHER

Materials typically specified alongside Ready-Mixed Concrete Grade G20 (20 N/mm²) on the same job.

COMPARE SIMILAR PRODUCTS

Ready-Mixed Concrete Grade G25 (25 N/mm²) → Ready-Mixed Concrete Grade G30 (30 N/mm²) → Ready-Mixed Concrete Grade G40 (40 N/mm²) → Self-Compacting Concrete (SCC) →

Send a Quote Request

By submitting, you agree to our Privacy Notice .