EN | MS

PRODUCT INDEX / STRUCTURAL MATERIALS

Hollow Concrete Block 200 mm

BLOCK

hollow block concrete block HCB hollow concrete block 200mm block blok konkrit berlubang blok HCB 空心混凝土砌块 空心砖 200mm空心砖
Hollow Concrete Block 200 mm
Request Quote Enterprise Tender Service

WHAT IT IS

Hollow Concrete Block (HCB) 200 mm is a standard masonry unit with a hollow core used for boundary walls, retaining walls, and commercial partition walls in Malaysian construction. Standard size 400 × 200 × 200 mm (L × H × W); approximately 72 pieces per pallet. Non-structural grade requires ≥3.5 N/mm² compressive strength; structural/load-bearing grade requires ≥7.0 N/mm². Practice aligns with MS EN 771-3 or BS 6073 as referenced in Malaysia. The hollow core reduces weight, allows conduit chasing, and can be grouted with reinforcement for load-bearing walls. UOM: piece. HS 6810110000 · import duty 20% · SST 0%. Also known as HCB, blok konkrit berlubang, hollow block, and 200 mm block.

UNIT OF MEASURE

PIECE (PRIMARY) PALLET

Typical pack size: Standard size 400 × 200 × 200 mm (L × H × W); palletised ~72 pcs/pallet

GRADE & SPECIFICATION

Hollow load-bearing or non-load-bearing concrete masonry unit. Compressive strength: non-structural ≥3.5 N/mm²; structural ≥7.0 N/mm². Conforms to general practice aligned with MS EN 771-3 or BS 6073 as referenced in Malaysian practice.

CLASSIFICATION

UNSPSC 30131502
UNSPSC codes are issued by the United Nations Global Marketplace (UNGM). CIDB categories are defined by Malaysia's Construction Industry Development Board. These codes are informational — use them to verify, not replace, procurement classification.

TARIFF & TAX — PDK 2025

HS CODE (AHTN) 6810110000
OFFICIAL DESCRIPTION Building blocks and bricks
IMPORT DUTY (MFN) 20%
SST 0%
Sourced from PDK 2025 (Customs Duties Order 2025). The import duty shown is the MFN / general rate — preferential rates under FTAs (ATIGA, ACFTA, etc.) are typically lower or zero. SST per the PDK 2025 schedule (a value like 10%/0% means standard/exempt variants). Indicative only — confirm the applicable rate and tax treatment with your licensed customs/tax agent before relying on it. Spotted an error? hello@ttkbuildingmaterials.com

QUICK REFERENCE

PRIMARY UOM

piece

TYPICAL PACK SIZE

Standard size 400 × 200 × 200 mm (L × H × W); palletised ~72 pcs/pallet

UNSPSC

30131502

GET QUOTES

Request Quote Tender Service

SUPPLIERS WHO CARRY THIS

STRUCTURAL MATERIALS SUPPLIERS →
BuildPro Malaysia

Selangor

Request Quote
Buildmate Hardware

Selangor

Request Quote
Ewarehouse

Kuala Lumpur

Request Quote
MyBuildingMaterial

Selangor

Request Quote
Building Materials Online

Selangor

Request Quote
Builtory

Kuala Lumpur

Request Quote

MALAYSIAN MANUFACTURERS IN THIS CATEGORY

Factories in Malaysia that make Structural Materials products.

Alliance Steel · Pahang Alpine Pipe Manufacturing · Selangor Amcan Color Coating Industries · Sarawak Amsteel Mills · Selangor Anchor-Link · Selangor Ann Joo Resources Berhad · Pulau Pinang Antara Steel Mills · Johor Array Metal · Selangor Asia Roofing Industries (Ajiya) · Johor Asia Wire Steel Mesh · Selangor

See all Malaysian building-materials manufacturers →

COMMONLY USED TOGETHER

Materials typically specified alongside Hollow Concrete Block 200 mm on the same job.

COMPARE SIMILAR PRODUCTS

Ordinary Portland Cement (OPC) 50 kg bag → Portland Pozzolana Cement (PPC / Blended Cement) 50 kg bag → Ready-Mixed Concrete Grade G20 (20 N/mm²) → Ready-Mixed Concrete Grade G25 (25 N/mm²) →

Send a Quote Request

By submitting, you agree to our Privacy Notice .