EN | MS

PRODUCT INDEX / WINDOW FILMS & TINTING SOLUTIONS

Safety / Security Window Film — 12 Mil (Clear or Tinted)

MAPPING UNDER REVIEW

SECURITY & SAFETY FILM

security film 12 mil blast mitigation film ballistic film anti-bomb film filem keselamatan 12mil 防爆膜 12mil forced entry film blast resistant film heavy duty security film
Safety / Security Window Film — 12 Mil (Clear or Tinted)
Request Quote Enterprise Tender Service

WHAT IT IS

12-mil safety/security window film is the thickest widely-specified construction-grade window film, designed for high-security environments including embassies, data centres, critical infrastructure, and blast-hazard zones in Malaysia. The 300-micron multi-ply polyester laminate provides the longest forced-entry delay (1–3 minutes) of standard film grades and can complement blast-resistant glazing design. Premium variants are blast-mitigation rated per GSA/ASTM F1642. UV rejection ≥99%. Available in clear or tinted finishes. Typically specified with a wet-glaze or mechanical attachment system. Supplied in rolls (60 in or 72 in wide × 100 ft) and installed per sqft. HS 3919909200 · import duty 20% · SST 10%.

UNIT OF MEASURE

SQFT (PRIMARY) ROLL

Typical pack size: Rolls: 60 in or 72 in wide × 100 ft; installed per sqft

GRADE & SPECIFICATION

12 mil (300 micron) thick multi-ply polyester laminate; clear or tinted; 1–3 minute forced-entry delay; blast-mitigation rated per GSA/ASTM F1642 in premium variants; UV rejection ≥99%.

CLASSIFICATION

UNSPSC 30171600
UNSPSC codes are issued by the United Nations Global Marketplace (UNGM). CIDB categories are defined by Malaysia's Construction Industry Development Board. These codes are informational — use them to verify, not replace, procurement classification.

TARIFF & TAX — PDK 2025

HS CODE (AHTN) 3919909200 (MEDIUM CONFIDENCE)
OFFICIAL DESCRIPTION Of addition polymerisation products; of condensation or rearrangement polymerisation products; of cellulose nitrate, cellulose acetates and other chemical derivatives of cellulose, plasticised
IMPORT DUTY (MFN) 20%
SST 10%
Sourced from PDK 2025 (Customs Duties Order 2025). The import duty shown is the MFN / general rate — preferential rates under FTAs (ATIGA, ACFTA, etc.) are typically lower or zero. SST per the PDK 2025 schedule (a value like 10%/0% means standard/exempt variants). Indicative only — confirm the applicable rate and tax treatment with your licensed customs/tax agent before relying on it. Spotted an error? hello@ttkbuildingmaterials.com

QUICK REFERENCE

PRIMARY UOM

sqft

TYPICAL PACK SIZE

Rolls: 60 in or 72 in wide × 100 ft; installed per sqft

UNSPSC

30171600

GET QUOTES

Request Quote Tender Service

SUPPLIERS WHO CARRY THIS

WINDOW FILMS & TINTING SOLUTIONS SUPPLIERS →
3M Malaysia (Architectural & Automotive Window Films)

Selangor

Request Quote
V-KOOL Malaysia

Selangor

Request Quote
LLumar Window Film Malaysia

Selangor

Request Quote
Solar Gard Malaysia

Selangor

Request Quote
Hüper Optik Malaysia

Kuala Lumpur

Request Quote
Rayno Window Film Malaysia

Selangor

Request Quote

COMMONLY USED TOGETHER

Materials typically specified alongside Safety / Security Window Film — 12 Mil (Clear or Tinted) on the same job.

COMPARE SIMILAR PRODUCTS

Safety / Security Window Film — 4 Mil (Clear) → Safety / Security Window Film — 8 Mil (Clear) → Anti-Graffiti / Surface Protection Window Film →

Send a Quote Request

By submitting, you agree to our Privacy Notice .