Name: Cut-Off Machine (Abrasive Disc Saw / Chop Saw)
Brand: ttkbuildingmaterials.com Product Index
Availability: InStock

WHAT IT IS

A cut-off machine (chop saw) is a bench-mounted power tool with a pivoting abrasive or diamond wheel for making precise straight cuts through steel bars, pipe, angle iron, conduit, and structural sections on Malaysian construction sites. The 355 mm (14") abrasive wheel to EN 12413 spins at 3,800–4,100 RPM from a 2,000–2,200 W motor. Cutting capacity: round bar up to 130 mm, angle iron up to 100 × 100 mm, pipe up to 100 mm OD. An abrasive disc cuts ferrous metals; a diamond disc cuts masonry and tiles. Integral wheel guard is mandatory. Standard fabrication and rebar preparation tool on structural concrete and steel projects.

UNIT OF MEASURE

PIECE (PRIMARY)

Typical pack size: Single unit; disc diameter: 355 mm (14") standard; motor 2,000–2,200 W

GRADE & SPECIFICATION

No specific Malaysian Standard. Motor: 2,000–2,200 W; wheel speed 3,800–4,100 RPM; 355 mm (14") abrasive wheel to EN 12413; cutting capacity: round bar up to 130 mm, angle iron up to 100 × 100 mm, pipe up to 100 mm OD. Wheel guard mandatory.

CLASSIFICATION

UNSPSC 27112733

UNSPSC codes are issued by the United Nations Global Marketplace (UNGM). CIDB categories are defined by Malaysia's Construction Industry Development Board. These codes are informational — use them to verify, not replace, procurement classification.

TARIFF & TAX — PDK 2025

HS CODE (AHTN) 8467290000 (MEDIUM CONFIDENCE)

OFFICIAL DESCRIPTION Other

IMPORT DUTY (MFN) 0%

SST 5%

Sourced from PDK 2025 (Customs Duties Order 2025). The import duty shown is the MFN / general rate — preferential rates under FTAs (ATIGA, ACFTA, etc.) are typically lower or zero. SST per the PDK 2025 schedule (a value like 10%/0% means standard/exempt variants). Indicative only — confirm the applicable rate and tax treatment with your licensed customs/tax agent before relying on it. Spotted an error? hello@ttkbuildingmaterials.com