EN | MS

PRODUCT INDEX / TIMBER & BOARDS

Moisture-Resistant Gypsum Board (MR / Type H1)

GYPSUM BOARD

MR gypsum board moisture-resistant plasterboard green gypsum board water-resistant gypsum board bathroom plasterboard Type H1 board papan gipsum MR papan gipsum tahan lembap 防潮石膏板 绿色石膏板 防水石膏板
Moisture-Resistant Gypsum Board (MR / Type H1)
Request Quote Enterprise Tender Service

WHAT IT IS

Moisture-resistant gypsum board (MR / Type H1) is formulated with hydrophobic additives in the gypsum core and moisture-resistant paper facing, colour-coded green for site identification. Classified Type H1 per BS EN 520:2004+A1:2009; core water absorption ≤5% after 2-hour immersion. Sheet size 1200 × 2400 mm (4 × 8); available at 9.5 mm and 12 mm thickness. Specified for kitchens, bathrooms, wet rooms, laundries, and other high-humidity interior spaces as a tile backer or painted finish where standard plasterboard would deteriorate. Not a substitute for fibre cement board where direct water contact occurs. HS 6809110000 · import duty 30% · SST 10%.

UNIT OF MEASURE

SHEET (PRIMARY)

Typical pack size: 1200 × 2400 mm (4′ × 8′); thickness 9.5 mm or 12 mm (12.5 mm by some manufacturers)

GRADE & SPECIFICATION

Type H1 (moisture-resistant) per BS EN 520:2004+A1:2009 and ASTM C1396. Green colour-coded paper facing or green-tinted core for identification. Water absorption of core ≤5% after 2-hour immersion (vs unrestricted for standard Type A). For use in high-humidity environments; not rated for direct water immersion.

CLASSIFICATION

UNSPSC 30161509
UNSPSC codes are issued by the United Nations Global Marketplace (UNGM). CIDB categories are defined by Malaysia's Construction Industry Development Board. These codes are informational — use them to verify, not replace, procurement classification.

TARIFF & TAX — PDK 2025

HS CODE (AHTN) 6809110000
OFFICIAL DESCRIPTION Faced or reinforced with paper or paperboard only
IMPORT DUTY (MFN) 30%
SST 10%
Sourced from PDK 2025 (Customs Duties Order 2025). The import duty shown is the MFN / general rate — preferential rates under FTAs (ATIGA, ACFTA, etc.) are typically lower or zero. SST per the PDK 2025 schedule (a value like 10%/0% means standard/exempt variants). Indicative only — confirm the applicable rate and tax treatment with your licensed customs/tax agent before relying on it. Spotted an error? hello@ttkbuildingmaterials.com

QUICK REFERENCE

PRIMARY UOM

sheet

TYPICAL PACK SIZE

1200 × 2400 mm (4′ × 8′); thickness 9.5 mm or 12 mm (12.5 mm by some manufacturers)

CATEGORY

Timber & Boards

UNSPSC

30161509

GET QUOTES

Request Quote Tender Service

SUPPLIERS WHO CARRY THIS

TIMBER & BOARDS SUPPLIERS →
Buildmate Hardware

Selangor

Request Quote
CL Hardware

Selangor

Request Quote
Saint-Gobain Malaysia

Selangor

Request Quote
ME FLOOR

Selangor

Request Quote
Akira Roofing Sdn Bhd

Johor

Request Quote
Heng Sheng Hardware Sdn Bhd

Selangor

Request Quote

MALAYSIAN MANUFACTURERS IN THIS CATEGORY

Factories in Malaysia that make Timber & Boards products.

AGT Safety Glass · Selangor Anchor-Link · Selangor Astino Berhad · Penang Bailey Plaster · Selangor CBL Malaysia · Pulau Pinang Claybricks & Tiles · Johor Crystal Safety Glass (CSG) · Selangor Daiken Sarawak Sdn Bhd · Sarawak Dongwha Malaysia Sdn Bhd · Negeri Sembilan Elecol Switchgear · Selangor

See all Malaysian building-materials manufacturers →

COMMONLY USED TOGETHER

Materials typically specified alongside Moisture-Resistant Gypsum Board (MR / Type H1) on the same job.

COMPARE SIMILAR PRODUCTS

Gypsum Plasterboard Standard 9.5 mm → Gypsum Plasterboard Standard 12 mm → Fire-Resistant Gypsum Board (Type F) 15 mm →

Send a Quote Request

By submitting, you agree to our Privacy Notice .