Name: Fibre Cement Board 4.5 mm / 6 mm (Thin)
Brand: ttkbuildingmaterials.com Product Index
Availability: InStock

WHAT IT IS

Thin fibre cement board (4.5 mm / 6 mm) is autoclaved from Portland cement, cellulose fibre, and silica to ISO 8336:2017 (Category A). It is a CIDB-regulated product requiring mandatory Certification of Standard Compliance (PPS) under CIDB Act 520. Non-combustible (Class 0 fire spread), moisture-resistant, and termite-proof. Density 1,000–1,400 kg/m³. Standard sheet 2400 × 1200 mm (8 × 4). Used for ceiling linings, internal wall cladding, soffit boards, and dry-area applications where lightweight and non-combustibility are required. Active brands in Malaysia: UAC (Cementboard, Vistabord), Saint-Gobain PRIMA. HS 6811829000 · import duty 20% · SST 5%.

UNIT OF MEASURE

SHEET (PRIMARY) M²

Typical pack size: 2400 × 1200 mm (8′ × 4′); thicknesses 4.5 mm and 6 mm

GRADE & SPECIFICATION

Autoclaved fibre cement flat sheet to ISO 8336:2017 (Fibre-cement flat sheets — product specification and test methods). Category A (autoclaved) or Category B (air-cured). CIDB-regulated product: listed under Fourth Schedule of CIDB Act 520 as a mandatory certification product (Fibre cement flat sheet not containing asbestos). Density typically 1,000–1,400 kg/m³. Non-combustible (Class 0 fire spread).

CLASSIFICATION

UNSPSC 30161501

CIDB CATEGORY Fibre cement flat sheet (not containing asbestos) — mandatory CIDB Certification of Standard Compliance (PPS) under CIDB Act 520 (Amendment 2011); ISO 8336:2017

UNSPSC codes are issued by the United Nations Global Marketplace (UNGM). CIDB categories are defined by Malaysia's Construction Industry Development Board. These codes are informational — use them to verify, not replace, procurement classification.

TARIFF & TAX — PDK 2025

HS CODE (AHTN) 6811829000

OFFICIAL DESCRIPTION Other

IMPORT DUTY (MFN) 20%

SST 5%

Sourced from PDK 2025 (Customs Duties Order 2025). The import duty shown is the MFN / general rate — preferential rates under FTAs (ATIGA, ACFTA, etc.) are typically lower or zero. SST per the PDK 2025 schedule (a value like 10%/0% means standard/exempt variants). Indicative only — confirm the applicable rate and tax treatment with your licensed customs/tax agent before relying on it. Spotted an error? hello@ttkbuildingmaterials.com