Name: Plywood Site Hoarding Panel
Brand: ttkbuildingmaterials.com Product Index
Availability: InStock

WHAT IT IS

Plywood site hoarding panels are structural plywood sheets fixed to a timber or steel frame to enclose a construction site perimeter where corrugated GI hoarding is impractical or where a smooth, paintable surface is needed for project branding and graphics. Sheets are typically 12 mm or 18 mm exterior-grade plywood (Type BWF or MR) in the standard 2.44 m × 1.22 m (8′ × 4′) size, fixed to a 2×3 or 2×4 timber frame at 600 mm centres. Required under UBBL 1984 in Malaysia. HS 4412330000 · import duty 35% · SST 5%.

UNIT OF MEASURE

PIECE (PRIMARY) M²

Typical pack size: Standard sheet: 2.44 m × 1.22 m (8 ft × 4 ft) 12 mm or 18 mm plywood; erected on timber or steel frame

GRADE & SPECIFICATION

Structural plywood 12 mm–18 mm on timber 2×3 or 2×4 frame at 600 mm centres. Typically exterior-grade (Type BWF or MR). Face may be painted for branding. Conforms to UBBL 1984 hoarding requirements.

CLASSIFICATION

UNSPSC 30261801

CIDB CATEGORY Site-Essentials / Temporary Protective Works (UBBL 1984)

UNSPSC codes are issued by the United Nations Global Marketplace (UNGM). CIDB categories are defined by Malaysia's Construction Industry Development Board. These codes are informational — use them to verify, not replace, procurement classification.

TARIFF & TAX — PDK 2025

HS CODE (AHTN) 4412330000 (MEDIUM CONFIDENCE)

OFFICIAL DESCRIPTION Other, with at least one outer ply of non-coniferous wood of the species alder (Alnus spp.), ash (Fraxinus spp.), beech (Fagus spp.), birch (Betula spp.), cherry (Prunus spp.), chestnut (Castanea spp.), elm (Ulmus spp.), eucalyptus (Eucalyptus spp.), hickory (Carya spp.), horse chestnut (Aesculus spp.), lime (Tilia spp.), maple (Acer spp.), oak (Quercus spp.), plane tree (Platanus spp.), poplar and aspen (Populus spp.), robinia (Robinia spp.), tulipwood (Liriodendron spp.) or walnut (Juglans spp.)

IMPORT DUTY (MFN) 35%

SST 5%

Sourced from PDK 2025 (Customs Duties Order 2025). The import duty shown is the MFN / general rate — preferential rates under FTAs (ATIGA, ACFTA, etc.) are typically lower or zero. SST per the PDK 2025 schedule (a value like 10%/0% means standard/exempt variants). Indicative only — confirm the applicable rate and tax treatment with your licensed customs/tax agent before relying on it. Spotted an error? hello@ttkbuildingmaterials.com