EN | MS

PRODUCT INDEX / SCAFFOLDING & SITE ACCESS

Ringlock Scaffold Standard (Vertical Post)

RINGLOCK SYSTEM

ringlock standard ringlock upright rosette scaffold standard modular scaffold vertical tiang ringlock ringlock post 环扣式脚手架立杆 碗扣架立杆 Layher allround standard
Ringlock Scaffold Standard (Vertical Post)
Request Quote Enterprise Tender Service

WHAT IT IS

Ringlock scaffold standard (vertical post) is the load-bearing upright of a modular ringlock scaffold system, used for high-load multi-deck scaffolding on industrial plants, bridges, and multi-storey construction in Malaysia. The hot-dip galvanised steel tube (OD 48.3 mm × 3.2 mm wall) carries a welded rosette disk at every 500 mm interval, accepting ledgers, diagonal braces, and transoms from up to eight directions without loose fittings. Common lengths range from 0.5 m to 3.0 m. Complies with BS EN 12811-1:2003 and EN 39:2001. Sold per piece. HS 7308409000 · import duty 15% · SST 5%.

UNIT OF MEASURE

PIECE (PRIMARY) M SET

Typical pack size: Common lengths: 0.5 m, 1.0 m, 1.5 m, 2.0 m, 2.5 m, 3.0 m; OD 48.3 mm; rosette node at 500 mm centres

GRADE & SPECIFICATION

Hot-dip galvanised or painted steel tube OD 48.3 mm × 3.2 mm wall, complying with BS EN 12811-1:2003 and EN 39:2001 (steel tubes for scaffolding). Rosette/disk welded at 500 mm intervals accepting up to 8 connectors simultaneously.

CLASSIFICATION

UNSPSC 30191502
CIDB CATEGORY Scaffolding — System/Modular Scaffold (regulated under CIS 22:2021; CIDB Fourth Schedule)
UNSPSC codes are issued by the United Nations Global Marketplace (UNGM). CIDB categories are defined by Malaysia's Construction Industry Development Board. These codes are informational — use them to verify, not replace, procurement classification.

TARIFF & TAX — PDK 2025

HS CODE (AHTN) 7308409000
OFFICIAL DESCRIPTION Other
IMPORT DUTY (MFN) 15%
SST 5%
Sourced from PDK 2025 (Customs Duties Order 2025). The import duty shown is the MFN / general rate — preferential rates under FTAs (ATIGA, ACFTA, etc.) are typically lower or zero. SST per the PDK 2025 schedule (a value like 10%/0% means standard/exempt variants). Indicative only — confirm the applicable rate and tax treatment with your licensed customs/tax agent before relying on it. Spotted an error? hello@ttkbuildingmaterials.com

QUICK REFERENCE

PRIMARY UOM

piece

TYPICAL PACK SIZE

Common lengths: 0.5 m, 1.0 m, 1.5 m, 2.0 m, 2.5 m, 3.0 m; OD 48.3 mm; rosette node at 500 mm centres

UNSPSC

30191502

GET QUOTES

Request Quote Tender Service

SUPPLIERS WHO CARRY THIS

SCAFFOLDING & SITE ACCESS SUPPLIERS →
Layher Malaysia Sdn Bhd

Selangor

Request Quote
Brisol (Malaysia) Sdn Bhd

Kuala Lumpur

Request Quote
AT-PAC Asia Sdn Bhd

Selangor

Request Quote
Sing Aluminium Scaffolding

Johor

Request Quote
U Win Trading & Supply Sdn. Bhd.

Johor

Request Quote
MPRO SCAFFOLDING SOLUTIONS SDN. BHD.

Selangor

Request Quote

MALAYSIAN MANUFACTURERS IN THIS CATEGORY

Factories in Malaysia that make Scaffolding & Site Access products.

AW Formwork Products · Selangor Crestform Scaffolding · Selangor Huatraco Scaffold · Selangor Jet Formwork IBS · Selangor

See all Malaysian building-materials manufacturers →

COMMONLY USED TOGETHER

Materials typically specified alongside Ringlock Scaffold Standard (Vertical Post) on the same job.

COMPARE SIMILAR PRODUCTS

Ringlock Scaffold Ledger (Horizontal Rail) → Ringlock Scaffold Diagonal Brace →

Send a Quote Request

By submitting, you agree to our Privacy Notice .