Name: Swing Check Valve (Bronze / Brass, PN 16)
Brand: ttkbuildingmaterials.com Product Index
Availability: InStock

WHAT IT IS

A swing check valve prevents backflow in residential water supply and heating pipework in Malaysia. The hinged disc swings open under forward flow and closes under reverse pressure, providing automatic non-return protection at pump outlets, water heater inlets, and branch connections. No manual operation needed — the disc responds to flow direction. Bronze or brass body, PN 16 rated, with screwed BSP ends from DN15 (½") to DN100 (4"). Also known as non-return valve (NRV), injap semak, or injap tidak-balik. HS 8481302000 · import duty 25% · SST 10%.

UNIT OF MEASURE

PIECE (PRIMARY)

Typical pack size: Sold per piece; sizes ½" – 4" (DN15 – DN100)

GRADE & SPECIFICATION

Bronze or brass body, PN 16. Screwed BSP ends. For cold and hot water, non-return duty.

CLASSIFICATION

UNSPSC 40141634

CIDB CATEGORY Plumbing Fixtures & Fittings — Valves

UNSPSC codes are issued by the United Nations Global Marketplace (UNGM). CIDB categories are defined by Malaysia's Construction Industry Development Board. These codes are informational — use them to verify, not replace, procurement classification.

TARIFF & TAX — PDK 2025

HS CODE (AHTN) 8481302000

OFFICIAL DESCRIPTION Of copper or copper alloys, with an internal diameter of 2.5 cm or less

IMPORT DUTY (MFN) 25%

SST 10%

Sourced from PDK 2025 (Customs Duties Order 2025). The import duty shown is the MFN / general rate — preferential rates under FTAs (ATIGA, ACFTA, etc.) are typically lower or zero. SST per the PDK 2025 schedule (a value like 10%/0% means standard/exempt variants). Indicative only — confirm the applicable rate and tax treatment with your licensed customs/tax agent before relying on it. Spotted an error? hello@ttkbuildingmaterials.com