EN | MS

PRODUCT INDEX / STRUCTURAL MATERIALS

AAC Autoclaved Aerated Concrete (Lightweight) Block

BLOCK

AAC block ALC block autoclaved aerated concrete lightweight block Ytong Starken ACON hebel gas concrete block blok AAC blok ringan 蒸压加气混凝土砌块 AAC砖 轻质砖 加气砖
AAC Autoclaved Aerated Concrete (Lightweight) Block
Request Quote Enterprise Tender Service

WHAT IT IS

AAC (Autoclaved Aerated Concrete) Block is a lightweight, thermally insulating masonry unit manufactured from silica sand, cement, lime, and aluminium powder cured under high-pressure steam, used for non-load-bearing partition and infill walls in Malaysian construction. Density 500–700 kg/m³ and compressive strength ≥3.5 N/mm² conform to BS EN 771-4:2003 as adopted in Malaysia. Common sizes include 600 × 200 × 100 mm, 600 × 200 × 150 mm, and 600 × 200 × 200 mm; supplied on pallets. UOM: piece (also m³, pallet). Major Malaysian brands include Starken AAC, Alam-Con (ACON), and Chin Hin AAC. HS 6810110000 · import duty 20% · SST 0%. Also known as blok AAC, blok ringan, Ytong, Hebel, lightweight block, and gas concrete block.

UNIT OF MEASURE

PIECE (PRIMARY) PALLET

Typical pack size: Common sizes: 600 × 200 × 100 mm, 600 × 200 × 150 mm, 600 × 200 × 200 mm; palletised per manufacturer

GRADE & SPECIFICATION

Density 500–700 kg/m³; compressive strength ≥3.5 N/mm². Conforms to BS EN 771-4:2003 (specification for autoclaved aerated concrete masonry units) as adopted in Malaysia. Major brands: Starken AAC, Alam-Con (ACON), Chin Hin AAC.

CLASSIFICATION

UNSPSC 30131512
UNSPSC codes are issued by the United Nations Global Marketplace (UNGM). CIDB categories are defined by Malaysia's Construction Industry Development Board. These codes are informational — use them to verify, not replace, procurement classification.

TARIFF & TAX — PDK 2025

HS CODE (AHTN) 6810110000
OFFICIAL DESCRIPTION Building blocks and bricks
IMPORT DUTY (MFN) 20%
SST 0%
Sourced from PDK 2025 (Customs Duties Order 2025). The import duty shown is the MFN / general rate — preferential rates under FTAs (ATIGA, ACFTA, etc.) are typically lower or zero. SST per the PDK 2025 schedule (a value like 10%/0% means standard/exempt variants). Indicative only — confirm the applicable rate and tax treatment with your licensed customs/tax agent before relying on it. Spotted an error? hello@ttkbuildingmaterials.com

QUICK REFERENCE

PRIMARY UOM

piece

TYPICAL PACK SIZE

Common sizes: 600 × 200 × 100 mm, 600 × 200 × 150 mm, 600 × 200 × 200 mm; palletised per manufacturer

UNSPSC

30131512

GET QUOTES

Request Quote Tender Service

SUPPLIERS WHO CARRY THIS

STRUCTURAL MATERIALS SUPPLIERS →
BuildPro Malaysia

Selangor

Request Quote
Buildmate Hardware

Selangor

Request Quote
Ewarehouse

Kuala Lumpur

Request Quote
MyBuildingMaterial

Selangor

Request Quote
Building Materials Online

Selangor

Request Quote
Builtory

Kuala Lumpur

Request Quote

MALAYSIAN MANUFACTURERS IN THIS CATEGORY

Factories in Malaysia that make Structural Materials products.

Alliance Steel · Pahang Alpine Pipe Manufacturing · Selangor Amcan Color Coating Industries · Sarawak Amsteel Mills · Selangor Anchor-Link · Selangor Ann Joo Resources Berhad · Pulau Pinang Antara Steel Mills · Johor Array Metal · Selangor Asia Roofing Industries (Ajiya) · Johor Asia Wire Steel Mesh · Selangor

See all Malaysian building-materials manufacturers →

COMMONLY USED TOGETHER

Materials typically specified alongside AAC Autoclaved Aerated Concrete (Lightweight) Block on the same job.

COMPARE SIMILAR PRODUCTS

Ordinary Portland Cement (OPC) 50 kg bag → Portland Pozzolana Cement (PPC / Blended Cement) 50 kg bag → Ready-Mixed Concrete Grade G20 (20 N/mm²) → Ready-Mixed Concrete Grade G25 (25 N/mm²) →

Send a Quote Request

By submitting, you agree to our Privacy Notice .